Jump to content
SAU Community

Recommended Posts

Nissan skyline R33

Car is a 1993 model, factory fitted Rb25det & manual 5 Speed.

Another feature of this car is its fitted with an Active LSD rear diff, rare factory option found in series 3 GTR's

Looking for $10k Firm as is, but price is negotiable im happy to take $8k for the car minus the 2 Front Recaro seats & Brembos, Factory items will be supplied.

Rego and RWC will be supplied with sale so the new owner can just drive it away ready to transfer into their name,

Rego remaining is 11 and a half months so roughly 12th september 2013.

If you need to contact me for anything, my number is 0432544363 (please contact me via my number as im not always on SAU)

Car is located in St Albans 30 minutes west of melbourne CBD

Specs listed below:

-162xxx kms

-Matte black paint job done 3 months ago

-Lowered 40mm (legal height)

-RB25DET & 5 speed manual

-Brembo brakes from GTR v-spec

-19x9.5 & 19x10.5 varrstoen wheels

-Series 3 GTR xenon projector headlights (custom fitted)

-Complete GTR interior, inc. Seats & door trims

-New exedy HD clutch good for 300rwkw

-11 months rego

-RSR exhaust (sounds really tough)

post-59775-0-25576000-1348502060_thumb.jpgpost-59775-0-62873700-1348502073_thumb.jpgpost-59775-0-90733500-1348502081_thumb.jpgpost-59775-0-80103400-1348502090_thumb.jpgpost-59775-0-68757900-1348502099_thumb.jpgpost-59775-0-27520400-1348502108_thumb.jpgpost-59775-0-34949900-1348502117_thumb.jpgpost-59775-0-47049800-1348502129_thumb.jpg

Edited by RJ06

Hey mate what offsets are you running on the varrstoens? How much did you have to flare the fenders to accommodate this fitment too (any rubbing issues as well)? Have you had any issues with the car over your ownership?

Genuinely interested.

Hey mate what offsets are you running on the varrstoens? How much did you have to flare the fenders to accommodate this fitment too (any rubbing issues as well)? Have you had any issues with the car over your ownership?

Genuinely interested.

Hey buddy wheels are +12 offset both front and rears, Guards were flared approx 20mm to suit wheels.

The only rubbing issue is with the front guard liners, which rub only on full lock and scrubbing from big bumps on the road. Rears dont rub on the guards at all.

Only problem ive had since being on the road was a defect due to the car having an exhaust which is a little bit too loud for their liking, long story short went through the Burnley tunnel in Melbourne and police handed me a defect.

Bump!

Wheels are no longer for sale. Comes with some 17"s with good tires.

10k come and get it!

9.5k if sold this weekend!

Also forgot to mention Roadworthy certificate has been obtained so it has another 28 days from now until it expires! :)

Not in a rush to sell it anymore guys, and for those low balling me dont bother.

Going to put the price to $11,000 complete or $9500 without the wheels.

Thanks guys! :)

Looks like good stuff. I'm usually not a big fan of matte black on cars as I think the colour kindda makes the car looks like a old shit box. But this 1 really changes my thoughts :) good luck!

Looks like good stuff. I'm usually not a big fan of matte black on cars as I think the colour kindda makes the car looks like a old shit box. But this 1 really changes my thoughts :) good luck!

Thanks for the kind words buddy! :)

  • 2 weeks later...
  • 1 year later...

If I wasnt happy with my own ride, i'd be pretty keen to get this, sounds pretty neat.

I wanted to know where you got the series 3 headlight and how they needed (or the car) to be modded to suit? I have a series 1.5, has the series 1 front end like yours looks to. And i really want this sort of head lights. Cheers.

I know this is old, i want to know about parts used on this vehicle to purchase them for my own!
I'm keen to find a set of headlights like used on this one.
Obsessive was the only muppet asking about the wheels. Pete33r was asking about where the lip was purchased.

Info on the headlights would be greatly appreciated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...