Jump to content
SAU Community

Recommended Posts

This morning I parked my car alongside the parklands in Nth Adelaide, as I have done many times, but when I went to get my car this afternoon (to drive home) some asshol* has gone around my car with a screwdriver or set of keys.

I am F*ing furious, if I ever find out who I'll kill them

Sorry I just have to vent my spleen here, I just don’t understand the mentality of these people.

On the good side I am insured (with Shannon’s) so the damage can be repaired, but I guess I will be without my car for a few weeks.

I just feel so violated. I don’t want to drive the car anymore now, somehow it feels dirty (if that makes any sense)

Link to comment
https://www.sau.com.au/forums/topic/41040-my-car-was-keyed-today-in-the-city/
Share on other sites

I'm beginning to think the car should only be taken out for cruises and shows, which means I would miss out on driving one of the best cars day to day.

I like to look after my car and would hate to think its a trailer queen, but after this I think I might invest in a little festiva for day to day driving and save the skyline for the weekend.

I've been pretty lucky with regards to keying..

If I take it places and park I will try to not wash the car as in a way I hope it will discourage people from stealing or keying it.

I would say they are some dero kids that have HRT crap plastered all over their walls.

I don't like the city.. Last time I parked up that way a few years ago I had some pissed magget kick my door as I was leaving because I wouldn't do a burnout. :D

Then next thing I know all these people walked out from the shadows surrounded the car and began throwing beer bottles, punching windows etc.

That was the first weekend I took the car for a drive. :)

If you can wait until the end of the month I'm getting my car back from a full respray from MEC crash repairs down at Lonsdale.

Apparently they have the only computerised Infra Red Robot spray booth in SA which measures paint thickness and also allows them to bake the paint at a higher temp as there are no people inside the booth. Gives a factory glass *Mitsubishi sytle* finish *Apparently*

I didn't say Holden as I think factory holden paint jobs look crappy up close.. Mitsi paint jobs are the best i've seen.

Depends if you can hang out that long.

They are also on Shannon's recommended lists.

Some time (a year or so) ago were u and your car in at RPM and made some where around 160rwkw? I remember speaking to a bloke while the 4 door was on the rollers?!?

Joel - thanks man. I havnt been to RPM for dyno work, only been to Tilbrooks and MorePower. I'll look into going to MEC, but I cant wait until the end of the month. I was considering going to Des Higgins in salisbury/parafield who paints Rolls Roice and other prestige cars (I have never heard of anyone speak poorly of his work)

One benifit of shannons is that they allow me to pick the repair shop rather than go to the cheapest nasty shop they can find, so at least the repair job should be of reasonable quality.

I'm not sure that I would be happy with any factory paint job, as I figure they are pained to a price rather than a quality. (I may be wrong, but measuring the thickness of paint seems to be a way of reducing the price rather than improving the quality.)

I would be interested in the Shannons recommended list however as I guess (and I may be wrong) these repairers do a qualty job.

Thanks Dean. Yes I will get it all painted one colour now, as I'm not that keen on the 2 tone effect. my guess is however that I will have to pay extra to get the bottom gunmetal grey painted, but it is a good opportunity.

P1E it would be a good time/reason to add a body kit but I’m a bit strapped for cash at the moment so I will probably have to wait and get that later.

COPYME, at least you had the opportunity to show the guy exactly how funny it was.  Alot more than most victims get, but good on you for showing him the light.

Well, i think it was a case of his lights going out he he. Little ****er! Just lucky timing! My GTR seems to be left alone "touch wood" How bad are the scratches anyways? could they be buffed out?

Guest Miss_Nismo
This morning I parked my car alongside the parklands in Nth Adelaide, as I have done many times, but when I went to get my car this afternoon (to drive home) some asshol* has gone around my car with a screwdriver or set of keys.  

I am F*ing furious, if I ever find out who I'll kill them

Sorry I just have to vent my spleen here, I just don’t understand the mentality of these people.  

On the good side I am insured (with Shannon’s) so the damage can be repaired, but I guess I will be without my car for a few weeks.

I just feel so violated. I don’t want to drive the car anymore now, somehow it feels dirty (if that makes any sense)

That really sucks “Mr Harrison” (sorry can’t break that habit)

When I was working there I had my pulsar keyed same location as you, and my trusty sigma was broken into and had $2500 worth of stuff stolen, no insurance, no alarm, no brain really. I learnt from that error.

Good luck catching the bastard but the main thing is you still have the car and it’s insured :)

CopyMe - the scratches are too deep to buff out, I tried to clean some of them up when I got home, but its a lost cause.

Melissa - Thanks, but next time could you put your hand up if you have something to say ( Sorry - another habit thats hard to break :-P )

4door -

That sucks heaps. Just recently my brother and his mates chased and managed to catch some dude breaking into a mates car not long ago at TTP, from what I heard the thief will have a life long memory of what club locks and a big Maglite torch are really made for

Hope if you ever catch the person or see someone else's car being scratched you will get some satisfaction in kicking the crap out of them

Sorry to hear your car has been damaged like that

How where Shannons about the whole thing? I am just about to switch from them and any input would be appriceated

Regards, Chris

Hi Chris

Shannons have been really good so far. That said I wo'nt here back about the quote and wether they accept it until the end of the week (Not a delay due to shannons, but just a busy week for the assessors)

I have a $400 excess to pay (because I cant identify the guilty party) and I need to ring them and check if my rating will be preserved as I have been rating 1 for more than 3 years.

That and the fact that they allow monthly payments (without a penalty - ie premiup divided by 12 = monthly payment) I intend to renew with them again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...