Jump to content
SAU Community

Recommended Posts

Thanks guys.

This is what I have so far:

VQ35 VQ35DE (03-06)

SKYLINE (03-06): PV35/CPV35

INFINITY G35

STAGEA : PM35/PNM35

FAIRLADY Z / 350Z (03-06): Z33/HZ33

FUGA : PY50/PNY50/Y50

VQ35HR & VQ35DE 07-UP (does any one know what year these finish?)

SKYLINE : PV36/V36/NV36

TEANA : PJ32/J32

MURANO : PZ51/PNZ51

FAIRLADY Z : Z33/HZ33

FUGA : PY50/PNY50/Y50

How about the 2.5 models? Which coils suit these? Are the above year models correct for the models listed?

V36 (2008-) and Z34 (370Z) use the same VQ37VHR engine although I believe the V36 sedans didn't get this engine until the 2009 model. Otherwise, up until then the V36 sedans got the V35 engine.

So the 350Z (07-08) uses the same coils as the Z34 (370Z)?

PM35 Stagea, Z33 350z, V35 Skyline, Y50 Fuga all use the same coil (22448-AL615).

From 2003-2012 this was superceded with the 22448-AL61C plug for VQ35de powered Stagea, Skyline and Fuga.

No mention of V36 or Z34, so I would imagine that they use a different coil.

ok. Ive done a bit more research and have compiled this list:

Yellow Jackets part# YJ-VQ35-S1 - (VQ25DD VQ30DD VQ35 VQ35DE 3.5L V6):

VQ35 VQ35DE 3.5L V6:

SKYLINE PV35/CPV35 (03-06)

SKYLINE V35 250GT/300GT VQ25DD/VQ30DD

SKYLINE V36 SEDAN (up to 2009)

INFINITI FX35 (03-08)

INFINITI G35 COUPE/SEDAN (03-07)

INFINITI M35 (06-08)

STAGEA : PM35/PNM35 (01-07)

M35 (06-07)

FAIRLADY Z / 350Z Z33/HZ33 (Includes roadster) - (03-06)

FUGA : PY50/PNY50/Y50

CEFIRO A33 (99-02)

CEDRIC/GLORIA (99-04)

LEOPARD Y33 (97-99)

CEDRIC Y34 (99-04)

GLORIA Y34 (99-04)

===================================================================

Yellow Jackets part# YJ-VQ35-S2 - (VQ35HR & VQ35DE 3.5L V6 / VQ37VHR 3.7L V6 / VR38DETT 3.8L V6):

R35 GTR VR38DETT (08-12)

SKYLINE PV36/V36/NV36

SKYLINE V36 sedans (2009-Up)INFINITI G35 COUPE/SEDAN (03-07)

INFINITI EX35 (08-Up)

TEANA PJ32/J32

MURANO PZ51/PNZ51

FAIRLADY Z Z33/HZ33 350Z (Includes Roadster) - (07-08)

FUGA PY50/PNY50/Y50

FX35 (09-Up)

M35 (08-09)

ALTIMA SEDAN (07-12)

ALTIMA COUPE (08-12)

MAXIMA (09-Up)

MURANO (09-Up).

V36 VQ37VHR (2008-Up)

Z34 (370Z) VQ37VHR

How does this look?

  • 4 weeks later...

ok. Ive done a bit more research and have compiled this list:

Yellow Jackets part# YJ-VQ35-S1 - (VQ25DD VQ30DD VQ35 VQ35DE 3.5L V6):

VQ35 VQ35DE 3.5L V6:

SKYLINE PV35/CPV35 (03-06)

SKYLINE V35 250GT/300GT VQ25DD/VQ30DD

SKYLINE V36 SEDAN (up to 2009)

INFINITI FX35 (03-08)

INFINITI G35 COUPE/SEDAN (03-07)

INFINITI M35 (06-08)

STAGEA : PM35/PNM35 (01-07)

M35 (06-07)

FAIRLADY Z / 350Z Z33/HZ33 (Includes roadster) - (03-06)

FUGA : PY50/PNY50/Y50

CEFIRO A33 (99-02)

CEDRIC/GLORIA (99-04)

LEOPARD Y33 (97-99)

CEDRIC Y34 (99-04)

GLORIA Y34 (99-04)

===================================================================

Yellow Jackets part# YJ-VQ35-S2 - (VQ35HR & VQ35DE 3.5L V6 / VQ37VHR 3.7L V6 / VR38DETT 3.8L V6):

R35 GTR VR38DETT (08-12)

SKYLINE PV36/V36/NV36

SKYLINE V36 sedans (2009-Up)INFINITI G35 COUPE/SEDAN (03-07)

INFINITI EX35 (08-Up)

TEANA PJ32/J32

MURANO PZ51/PNZ51

FAIRLADY Z Z33/HZ33 350Z (Includes Roadster) - (07-08)

FUGA PY50/PNY50/Y50

FX35 (09-Up)

M35 (08-09)

ALTIMA SEDAN (07-12)

ALTIMA COUPE (08-12)

MAXIMA (09-Up)

MURANO (09-Up).

V36 VQ37VHR (2008-Up)

Z34 (370Z) VQ37VHR

How does this look?

Just a correction, the Skyline V36 Sedans have VQ35HR (PV36) and VQ37VHR (KV36) engines.

PV36 are from 2006-2008

not a V36, I have a 370z, same engine though so imagine this would make for a sufficient test subject, I drive a minimum of 500km a week with a mix of highway and town driving, and i cant resist going hard in it half the time :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...