Jump to content
SAU Community

Recommended Posts

Hi Guys,

I got a Cobb and have been using Stage 2 & LC5 for my ADM2009 on the road since. Great burst of power and improved drivability.

(I'm on 98RON Shell vPower, HKS res midpipe, K&N air filter element)

I took it to Phillip Is (18 deg C) and Sandown yesterday (23 deg C).

I noticed flashing of the boost gauge - which I think means that there is "knocking". This usually happens after the 3rd or 4th lap, especially if I hit the rev limiter. Sometimes it occurs even at 5000rpm in 2nd gear and tends to linger for about 5 to 10 seconds. I feel the car is not as fast as it normally is.

How do I fix this?

Is this BAD for the engine?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/411598-knocking-with-stage-2-cobb/
Share on other sites

Thing is, it doesn't do it when I drive on the road.

The Stage 2 is the Off-the-shelf map that came with the Cobb, which I thought was conservative.

What parameters should I log?

Thanks for the reply, Martin. I received your Trans Fluid 35TML last week and filled it up before Sandown. Goes nicely.

Sounds just like the tune is street conservative, but not track conservative (3-4 laps heat++ etc) - they are two totally different scenarios really.

Good news is it's not a major fix required, but certainly shouldn't keep trying to replicate it! Knock = bad.

So maybe after 2 laps have an easy 1 rather than going for 3-4 (until its fixed) :)

Does that meant if I get a track-oriented tune, it would generate less power? Because it would have to dial down the timing or boost to cope with heat.

Would larger injectors to fix this?

No point in speculating about it, you need to generate a log of some third and fourth gear pulls and then let me have a look through it. Either that or get the right map for your car running Aussie 98 fuel - such as the tune we supplied for Duncan Forrests GTR that won the NSW Supersprint championship two years in a row. No knocking, plenty of power.

OTS Cobb maps are ok, but they tend to not be a bit sketchy when pushing the limits of our 98 fuel - as they simply dont calibrate on it in the US. Regardless of what you do, that flashing engine ligh it something to take note of, and try to avoid if the idea of rebuilding an engine scares you even just a little bit :)

If you want someone local (Bayswater-Vic) the guys at Racepace can put it on the dyno for you and they have the Cobb tuning software.

9762 9421

But I've seen a few R35's knock at Sandown and PI as they have a lot of engine load at those tracks.

Ok maxzugkraft I have had a chance to have a look at a few of your looks. Looks like the tune is working really really nicely, the only time there was any indicated knock (false knock) was when you shifted on the rev limiter. The yellow line in the picture below is 'knock' and as you can see it stays on zero the whole length of the run...which is very nice :)

486666_10151212210434571_56066567_n.jpg

Thanks Martin.

I can't see your picture. There is a question mark instead.

Will this tune work for warmer weather? 25-28deg C?

Bear in mind the log was done at 15 deg C ambient temp.

Is it running too rich, as I'm getting a lot more black soot on back now.

Thanks Martin.

I can see your screenshot now.

Now I can use full power without holding back!

Can't wait to get back on the track!

Hope to see lap times plummet.

Good job. Cheers!

If you want someone local (Bayswater-Vic) the guys at Racepace can put it on the dyno for you and they have the Cobb tuning software.

9762 9421

But I've seen a few R35's knock at Sandown and PI as they have a lot of engine load at those tracks.

Would you recommend some further intercooler upgrades on top of the custom dyno tune?

Pinging at 18degC or 23degC ambient temp is pretty bad.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...