Jump to content
SAU Community

Recommended Posts

Hi, i have 2x4 sets of BBS e88 wheels for-sale, they have a deep center which will clear any brake caliper on the market as they are designed to clear super wide racing calipers.

They are center-lock wheels but they can have a 5 stud drilled into them, In trans-am racing the center-locks are illegal so they have them drilled for a 5 stud.

I can do this for you through cnc machine or you can have any good wheel place do it.

Sizes from 10" to 12.5 all in 18" these are the lightest 18" wheels that can be had.

all wheels are black with silver rim halves.

Price: $3000 for a set of 4.

PM or phone: 0431 113 255 for details.

More details and photos when i get back.

Here are photos for reference, they are the exact same wheel only in black, can be painted bbs gold:

DSCN69731323417560.jpg

DSCN69711323417539.jpg

Machined with 5x130pcd

BBSe88.jpg

Set A:

18x11.5" with a +7mm offset.

Set B:

18x10.5" with a +16.6mm offset.

Set C:

18x9.5" with a +19mm offset.

set D:

18x11.5" with a -6mm offset.

set E

18x11" with a -4.7mm offset.

Waiting on the last set details.

18x11.5 with -7mm would suit.

Are the centres painted or anodised?

Is there a hubcentric ring machined into the back of the rim centre?

18x11.5 with -7mm would suit.

Are the centres painted or anodised?

Is there a hubcentric ring machined into the back of the rim centre?

Sorry.... - 6.0mm offset.

Ok, Payment was not received for the last set, i dont take excuses so there still anyone's set, please if your not genuinely interested dont waste my time, these are very very rare to get a hold of so if you dont have the asking price please have a look then move on....

Cry..... Buyer of Set C if you are out there. Deal with a brand new lips/barrels/bolts set of BBS RS 17x9.5 et19? 2.5 in lips rear, 1.5 in lips front, 1/4 height billet caps?

IMG_0841.jpg

IMG_0842.jpg

IMG_0676.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...