Y34 Gloria/cedric Owners Manual In English

[rb26stagea]

Oh, FYI guys: got the Gloria serviced yesterday: air filter is the same as a Commodore...

[BurtoN86]

Ewwww don't say that! haha

[rb26stagea]

Easy to source, nice and cheap: what's not to like?

I have also been in regular contact with another Y34 owner who has successfully sourced (Maxima?) brake pads, and shimmed them to fit our cars: will post part numbers when I get them...

Also, just FYI: not sure if it's a common issue (I haven't experienced it), but he had ongoing, intermittent rough-running issues, which after much diagnosis turned out to be failing ignition coils.

Just a couple of things to bear in mind: once we get enough info, it may be a good idea to create a Y34 parts/service sticky thread, as there's precious little information available on the interwebs...

[BurtoN86]

Yeah i agree - i've found there's really not much info available on there however Aus-Vip.com i have found has a little.. not much.. but a little haha. I have the same intermittent rough-running issues but i had put it down to coilpacks as it seems to be the same sort of issue as what I had years ago in an S13 then replaced the coilpacks and all fixed.

I havn't bothered to buy new coilpacks yet for my Y34 but was planning on getting a set of Yellow Jackets from performance-wise.

[BurtoN86]

Also I had my radiator end tanks replaced which turned out to be the same/very similar to Navara radiator end tanks so they were used

And when i needed new brake pads I took the worn out pads to SA Brake & Clutch and they matched them up with some replacements - no modification was needed either.

[rb26stagea]

yeah: the brake pad thing seemed a little odd to me: I figure I'll be able to source a set of Endless or similar quite easily. Will do some research to ascertain whether ours are the same as the USDM M45- I'd say it's a pretty safe bet. Also, have seen a number of Y34s going at auction with what I believe to be CPV35 Brembos fitted, so it may be that we run the same brakes as a non-brembo V35, given Mr. Nissan's tendency to use interchangeable parts.... Once again: more research required.

[rb26stagea]

Ah Kouki: just looked at your profile - you currently have a V35? might be worth a look...

[BurtoN86]

Yeah i do have both and yeah looks to me that they're the same from memory when i did them.

[Nanda]

Can someone please send me a copy of the english manual. I am having a hard time figuring out the buttons. My emaill is [email protected]. Thanks in advance.

[BurtoN86]

Sending now Nanda.

[Nanda]

Kouki, can you pls send it to my mail again coz i haven't got the manuals yet. Thanks

[email protected]

[BurtoN86]

Have sent again. Maybe check your junk folder.

[rb26stagea]

Is there any way we can have this posted so its available for all our new y34 friends?

[rb26stagea]

Personally, I'm not tech savvy enough to even contemplate trying...

[Nanda]

Thanks. got it

[BurtoN86]

hmm.. ill see if i can work out how

[BurtoN86]

For all those who whish obtain a copy of the Y34 English Translation.. click the following link and follow the prompts.

http://www.filedropper.com/y34translations

[rb26stagea]

Champion!

[BurtoN86]

For anyone looking for more info on part compatibility for Y34's (servicing, etc) see this thread: http://aus-vip.com/topic/2778-y34-gloriacedric-maintenance-info-part-number-listing/

[taranaki gloria]

Please could you send me the translations, as they are not available on filedropped anymore. Been searching for it for ages. Email is [email protected]