Jump to content
SAU Community

Recommended Posts

Hi everyone, looking for a R32 or R33 GTR chassis/shell can be bare shell, needs to be complied and registerable.

Looking for straight chassis preferably with no damage, not fussed about bumpers or anything, does not need to be rolling, no interior or dash required. Basically need a donor car to put my interior and running gear into.

Located in Vic, but will travel for the right one.

Link to comment
https://www.sau.com.au/forums/topic/412785-gtr-chassis-bare-shell/
Share on other sites

i have a 33 GT-R however it has some damage front right chassis rail, and bog on real left quarter - would be fine to race though

repair of front chassis rail wouldn't cost a great deal considering the car is now stripped

send me a PM if your interested - has compliance and non VIV so after repair doesn't need to be inspected

I have a R32 GTR minus and engine/gearbox and seats.

Every other part is still there including all looms, interior, aircon, suspension etc

It was registered a few years ago in my name but decided to part it out as I never drove it.

Would rather sell it as is but would sell the shell seperate if you want it quickly and not going to mess me around.

I'll let it go cheap to get my shed space back.

$3500 as is for the lot minus wheels and brakes. You can sell what you don't want to make it cheaper.

Or bare shell $2500 stripped out with only hanging panels.

Where are you located Gareth? Can you send me pics of the car 0439990557 or email them to me please [email protected] Also it is rolling at the moment?

have one if Rowdy's doesnt work out, 3000 shell only $5k shell + panels Could do a deal on a R324 style kit with Xenon lights (Extra 3k), located Mornington Peninsula Victoria

post-69371-0-85519800-1352461180_thumb.jpg

post-69371-0-04635000-1351390541_thumb.jpg

most parts available..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...