Jump to content
SAU Community

Recommended Posts

Blue R33 with a dodgy R34 front end conversion? I used to see it around every now and again in Hobart when it was still registered a few years back, I thought it looked awesome when I first saw it but on closer inspection it looks like it was a little bit roughly put together (never saw in too much detail though). The guy who owned it at the time drove it like the king of douche bags. Only general douche baggery in traffic and throwing it around, seemed to like the image, never saw him sitting on limiter or anything like that though.

From memory when I was initially praising the cars looks Funz32 didn't seem to think much of it, I don't know how much experience he had with the car but he knew the driver by name (daniel? I think?), could be worth asking him :)

A lot of people from here should know the car because it stands out like a sore thumb, good luck mate

Found it, even has pics of how it was in January 2010. Reading my posts it seems I have a pretty different opinion of the car and driver, maybe time has made me into an arsehole?

Either way, this is the post I was looking for:

has been in a severe front end, not sure of how much damage came out of it though, but a bit. as for the rest.. umm yeah.. no comment :)

Here's the rest of the thread for context:

http://www.skylinesaustralia.com/forums/topic/152949-tassie-spotto/page__st__540

cheers guys, the few times i saw it, it was pretty haggard too, but now seems to have had some $$ spent on it as its all one colour and looked straight? only thing that put me off was the fact it is unrego'd and needs pitting and still asking 8k...

iv been informed its rb25de+t with a 20 box? can anyone confirm this?

yes i know that car , it's definitely de+t , still 4 stud last time i saw it , has definitely had a hard life by the people i saw that owned it . all of the body kit was sikaflexed on and painted over , the best part about the car was the new head lights . it may be better than it was when i last saw it though .

*shameless plug* i have a nice 32 sedan id sell around that money , nice tidy car :)

Left hand rear quarter has about 50 pounds of bog in in it, looks Like it was applied with a shovel and rubbed with a rock. Hands down one of the biggest shitters about. Was "clean" about 6 years ago, would make good target practice now.

wasnt really looking for a tidy daily all the same as i have my 32 and a bmw, but still.. i turned away from it lol.

he's asking 8k needing pitting.. (dreaming i know but i planned to lowball him and use facts against him lol)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...