Jump to content
SAU Community

Favour - Borrow Some R32 Coilpacks That Are Known To Work


Recommended Posts

I'm in a bit of a bind, I have new coilpacks and a miss fire at 4000rpm that screams coilpacks. Does anybody SE have a spare set of known to be working r32 coils I could chuck in to test?

*sigh*

I'm in a bit of a bind, I have new coilpacks and a miss fire at 4000rpm that screams coilpacks. Does anybody SE have a spare set of known to be working r32 coils I could chuck in to test?

*sigh*

I got my stockies but they were misfiring after a long drive :(

I'm sure some of them would still be good although not sure which one...

Let me know

Could it possibly be the coilpack loom? I've known a few times this to be the cause too

They go all hard a crispy after heating up so much after time, and some of the clips break etc

Told Dave to check it few times, he said it's basically at same age as his coilpacks which is a year old or so.

Think he's trying bcpre7s plugs next.

Your problem may well lie somewhere here. 7s are possibly too cold, try some 6s.

He's having issues with 6s at the moment gapped with 0.8mm

He had 1.1 gap that was misfiring, changed to 0.8, same story.

He've tried another coilpacks, igniter to no avail. Dave has put up a thread on forced induction with detailed problem.

Yeah i'm not trying to be difficult and be obscure, there is another thread (although i'm open to more ideas tbh this is killing me).

It's a misfire at 4000rpm under load when hot. Boost is 14psi. Car has been running fine, misfire appeared towards end of 5000km service interval so I assumed it was just old plugs which were 1.1 gapped. After replacing with 0.8mm gap it hasn't gone away.

It definitely isn't coilpacks, igniter. I am confident it isn't the loom it's new and not old and shitty like many I have owned that I had troubles with.

Gap, can try going back to 1.1 except everyone is certain that 0.8 should reduce misfire problems...

So that leaves me with fuel pressure (I have an 044 intank which could have packed up and given up, they arent' meant to be mounted intank). My workshop has recommended i check the pressure at idle.

Charge air measurement (haven't had any issues with these AFM yet but it could be one of them being a prick). I can check this with consult.

if it isn't those two things, i'm scared, and out of ideas ;). Thanks for your all your suggestions.

i only had misfire when car was hot and revving above 4000rpm. Just like how you described. Removed coilpacks, inspected and looked visually fine. (no cracks etc). Mechanics were telling me its not coilpacks either.

Ended up replacing with brand new splitfires and problem was gone.

Unless you have tested with a brand new set of coilpacks, i wouldnt rule them out just yet...

I tested with a set of splitfires from one of my other skylines that is currently driving around just fine. Not sure you can get a better test of coilpacks? Not only that but these coilpacks are literally new genuine nissan units... really hard to believe it is the coilpacks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...