Jump to content
SAU Community

Recommended Posts

Badben your sig say's you drive a 32 GTR. You mustn't do much night driving.

Get any modern car behind an old R32 at night and the 32 driver is driving in his own shadow.

Unfortunately their headlamp design is 20+ years old.

Add the sad wiring design and you've got poor lights, especially on low beam.

But fitting 6500+ HID's is just asking for trouble from the law who can pick the way overblue colour a mile off.

And what driver wants to be blinded by road sign reflection from his your own lights.

Stay with 4300 max. on low beam only.

  • 2 weeks later...

R31 projectors are better than R32 ones!

I have 4300K in my 32, make sure you aim the lights properly (should be juust below horizontal, as the car is low).

Heaps of glare, but that's just poor projector design to begin with.

I'm in the process of going back to halogens, going to test out a few bulbs.

BTW, if you have reflectors, I hope you're not using aftermarket HID kit. 'Blue Power' halogens work well.

The factory R34 HID's have a nice clean light cut-off, they don't dazzle at all. If you stick to 4300K bulbs and leave the level adjustment to the lowest setting you're not likely to ever get any unwanted attention.

That sux bro - I'm in the middle of putting GTR HID's in my ER34 :\ hope the same doesn't happen to me. On that note, if anyone has done this before can you let me know - i'd like to run a couple things by you as I'm having trouble.

Cheers.

  • 5 months later...

I know this thread is a bit old so apologies for necro posting but everywhere I search I see people repeating the same "must have auto levelling" line.

However, from the relevant ADR:

http://www.comlaw.gov.au/Details/F2013C00238

Vehicle Standard (Australian Design Rule 13/00 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles) 2005

6.2.6.2.1. In the case where a headlamp levelling device is necessary to satisfy the requirements of paragraphs 6.2.6.1.1. and 6.2.6.1.2., the device shall be automatic.



6.2.6.2.2. However, devices which are adjusted manually, either continuously or non‑continuously, shall be permitted, provided they have a stop position at which the lamps can be returned to the initial inclination defined in paragraph 6.2.6.1.1. by means of the usual adjusting screws or similar means.



These manually adjustable devices must be operable from the driver's seat.



Continually adjustable devices must have reference marks indicating the loading conditions that require adjustment of the dipped-beam.



The number of positions on devices which are not continuously adjustable must be such as to ensure compliance with the range of values prescribed in paragraph 6.2.6.1.2. in all the loading conditions defined in Annex 5.



For these devices also, the loading conditions of Annex 5 that require adjustment of the dipped-beam shall be clearly marked near the control of the device (see Annex 8).

Of course this doesn't automatically mean the R34's xenons are legal but at first glance they seem to meet the basic requirements of levelling (not sure about specifics like max. adjustments etc.) There is definitely wiggle room with regards to levelling requirements.

If I'm incorrect on any of this please let me know.

I know this thread is a bit old so apologies for necro posting but everywhere I search I see people repeating the same "must have auto levelling" line.

However, from the relevant ADR:

http://www.comlaw.gov.au/Details/F2013C00238

Vehicle Standard (Australian Design Rule 13/00 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles) 2005

Of course this doesn't automatically mean the R34's xenons are legal but at first glance they seem to meet the basic requirements of levelling (not sure about specifics like max. adjustments etc.) There is definitely wiggle room with regards to levelling requirements.

If I'm incorrect on any of this please let me know.

Don't know why I'm posting in an old thread as well or how you found this but some food for thought, some R34's with OEM Xenon headlights DON'T have the leveling switch where the switch panels is next to the driver window switch, then again some HAS. My car is equipped with it so I think that would be the bare minimum. Also have been told that there needs to be "washers" for the headlights, incase the dust can dazzle oncoming drivers..

Came across this thread looking for headlight parts for my R34. Agree that washers are required too, was just pointing out that lack of auto leveling isn't necessarily a reason for being defected :happy: .

Don't know why I'm posting in an old thread as well or how you found this but some food for thought, some R34's with OEM Xenon headlights DON'T have the leveling switch where the switch panels is next to the driver window switch, then again some HAS. My car is equipped with it so I think that would be the bare minimum. Also have been told that there needs to be "washers" for the headlights, incase the dust can dazzle oncoming drivers..

Fair enough if that's the case..were these cars coupes or sedans? It just seems a bit odd because according to Nissan data, xenons + adjusters went hand in hand together and were standard equipment on the coupes, OPTIONAL package for certain sedans (see links below). That would lead me to believe any xenon cars without adjusters were not factory xenons, i.e. xenons were fitted afterwards by the owner (aftermarket kits or swapped with OEM xenon headlights), or with switches taken out (duno why somone would do that though).. who knows. But of course I could be totally wrong as I'm relying on the accuracy of nissan's own data.. :)

Sedans:

http://translate.googleusercontent.com/translate_c?depth=1&hl=en&prev=/search%3Fq%3Dnissan%2Bhistory%2Bjp%26safe%3Doff%26client%3Dopera%26hs%3Db4W%26hl%3Den%26channel%3Dsuggest%26biw%3D2560%26bih%3D1284&rurl=translate.google.com.au&sl=ja&u=http://history.nissan.co.jp/SKYLINE/R34/9805/SPEC/frame4d.html&usg=ALkJrhjf7Ao5yxBJiPHYxg09cx6_KcTWYQ

Coupes:

http://translate.googleusercontent.com/translate_c?depth=1&hl=en&prev=/search%3Fq%3Dnissan%2Bhistory%2Bjp%26safe%3Doff%26client%3Dopera%26hs%3Db4W%26hl%3Den%26channel%3Dsuggest%26biw%3D2560%26bih%3D1284&rurl=translate.google.com.au&sl=ja&u=http://history.nissan.co.jp/SKYLINE/R34/9805/SPEC/frame2d.html&usg=ALkJrhi1Hak3JHxDbRjCB-upgf_C8BIsvg

Edit: Series 2 page on the same website doesn't state risers with the xenons, not sure if just not mentioned out actually removed from the car. Have seen series 2 with the switch though

Edited by fusion07

Is there any chance you can just buy a pair of 4300k or lower globes, so they look more yellow/halogen like and HOPEFULLY it can pass? haha

How will testers actually test whether the light is HID or not? Because the factory ballast is hidden underneath the headlight...


i thought it was pretty obvious for a qualified person to be able to tell if it's HID or not. if you look behind the lights in the engine bay its totally different

The ballasts are also easily visible if you look from the middle where the Grille is towards the bottom of the lights, sticking out quite clearly

Is there any chance you can just buy a pair of 4300k or lower globes, so they look more yellow/halogen like and HOPEFULLY it can pass? haha

How will testers actually test whether the light is HID or not? Because the factory ballast is hidden underneath the headlight...

Philips 85122 is 4300K, be careful of ebay ones, most are fake. You can get 4300K from ebay as well for about $20 each. Alignment is usually slightly out on those ebay ones. The 85122 gave a better cutoff and slightly better spread on my headlights (not OEM, Morimoto projectors).\

It's pretty easy to tell whether your headlights are HID or not. Colour, warm up, sharp cut-off, blue cut-off line (which is what dumb arses running 8,000-10,000K bulbs want in their halogen reflectors).

Ahhh... Guess that wouldn't work then....

When I first bought my car (car was complied back in 2004 when compliance was strict), my headlights were converted to H1, ballast taken out, globe cover has a hole drilled to wire in the H1. But i eventually bought a pair of stock Xenon headlights. I think nowadays, you'd have to be real unlucky to get done for HID's... Unless you have some blinding 10000k purple HID's lol

I've seen way to many blinding blue/purple headlights on the roads to think the police aren't doing much. A factory set will hardly get picked on, unless the officer didn't really like you or your car. I've been through a couple of RBTs with my HIDs and they didn't even give it a second look (4300K, projectors, properly aligned so it doesn't hit them in the face like half the cars in Sydney).

Nothing beats OEM HIDs though. Takes like 5 seconds to warm up, and you get a nice white, non-ricer light with even spread and a nice cut-off.

I love my bi-xenons though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...