Jump to content
SAU Community

Recommended Posts

My r34 GTT has decided to develop a miss under 2k rpm but only when warm and only when under load (2nd gear with large amount of throttle will do it, 3rd and 4th gear is much worst).

There are no error lights on the dash and car works perfectly while still warming up issue only begins once at operating temperature.

I also have no problems at higher revs at all comes on boost well and revs throughout without any problems.

I am stumped as to what could be causing this.Have had a look around to see if anything seems to be out of place (have changed the turbo a fair while back now) but don't see any obvious problems.

Anyone got any ideas as to what would cause something like this? Seems to be very specific in the parameters it needs to cause the issue

Link to comment
https://www.sau.com.au/forums/topic/413796-low-rpm-high-load-miss/
Share on other sites

I have installed a bosch fuel pump and haven't changed the wiring from stock so I guess that is a possibility. Still seems strange to start doing it when warm but I guess it is possible the ECU drops the fuel pump voltage when no longer in cold start due to needing less fuel?

I have basic stuff installed:

Fuel pump

Atr43 turbo

FMIC

splitfire coilpacks (also have fairly new copper spark plugs in there i'd say <1000k's old)

Nistune

Most other stuff is stock ATM have got injectors that will be going in soon as well as Z32 AFM

Oh also when changed spark plugs I changed the fuel filter and air filter

  • 2 weeks later...

What setup?

Only thing im thinking thats alittle outside the box is the fuel pump wiring. If u havent rewired it maybe the low rpm (low voltage) not enough fuel

^^ This.

Rewire the pump through a relay and take it back for a clean up tune.

This was the problem cheers for that guys. Took it for a long drive tonight (after doing fuel pump rewire) and had zero problems all ready to be tuned up on Sunday now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...