Jump to content
SAU Community

Recommended Posts

I ordered a second 40mm G35 Mishimoto radiator when I got mine sent over from the US, mainly to keep shipping low. If anyone is interested I am looking for what it cost me landed, $530 plus shipping to you.

It fits V35 auto and manual including the thermo fan bolting straight up, and also the Stagea M35's, with slight trimming of the fibreglass around the cap.

I will be fitting mine this weekend so I will be able to talk you through installation if needed. I have already installed on into a V35 auto without dramas. Great quality dual pass core with a lifetime warranty, perfect for FI or track work.

post-63525-0-67106500-1353554935_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/414196-mishimoto-radiator-new-in-box/
Share on other sites

I ordered a second 40mm G35 Mishimoto radiator when I got mine sent over from the US, mainly to keep shipping low. If anyone is interested I am looking for what it cost me landed, $530 plus shipping to you.

It fits V35 auto and manual including the thermo fan bolting straight up, and also the Stagea M35's, with slight trimming of the fibreglass around the cap.

I will be fitting mine this weekend so I will be able to talk you through installation if needed. I have already installed on into a V35 auto without dramas. Great quality dual pass core with a lifetime warranty, perfect for FI or track work.

I take teh pity.

I have one of these Rads. It is good quality, and lowers temps significantly.

  • 3 weeks later...

Make an offer guys. :)

I have a brand new Nismo coppermix twin plate clutch for sale (PN: 3002A-RSZ30), arguably the best street clutch available for the VQ. It comes complete with new flywheel and bolts, throw out bearing, Nismo needle roller and stock bronze bush spigot bearings. RRP is $3300, looking for $2200.

I also have two 6spd manual 350z gearboxes available with low K's, one of which has a small hole in the case. (repairable or good for spares.) PM me if interested.

Going in a different direction and keeping the slush box.

post-63525-0-64035500-1355408183_thumb.jpg

post-63525-0-75837500-1355408200_thumb.jpg

post-63525-0-23805500-1355408218_thumb.jpg

post-63525-0-43027900-1355408240_thumb.jpg

Hey Scotty do you still have this radiator? I was putting some pennies aside to buy your dump pipe for my m35 and it was meant to be a b'day present to myself (15/12) but I noticed a coolant smell the day after and guess what my top tank has a crack below the filler neck :(

You say this one fits v35 auto/manual, but looking at pics it doesn't seem to have the cooler attachments, do u need to run a seperate auto cooler? If that's the case ill just try find a super cheapy e-bay for now, so cut I really wanted that pipe now!

Yes Dave, you'll need a separate auto trans cooler. PM wagon_boy, he just replaced his and he might want to get rid of his old one (which is exactly the same B&M that I'm fitting shortly).

Cheers BigKev,

Appreciate the help, I reckon ill probably go the $300 eBay style for now, need the car safe to drive ASAP. Had $500 to spend on the dump so i thought if i could have picked up the mishi without needing extras that would be worth it. Really want to finish the exhaust system first before other mods, just fitted a Kakimoto-R cat back.

The mishimoto has trans cooler fittings built in, at least the last two I bought did. Would you like me to check?

That said, a secondary trans cooler is suggested when you start modding...

The mishimoto has trans cooler fittings built in, at least the last two I bought did. Would you like me to check?

That said, a secondary trans cooler is suggested when you start modding...

You know that's funny, mine has what I thought were trams cooler fittings too, but Mishi say manual only...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...