Jump to content
SAU Community

Recommended Posts

Paul di Resta has been excluded from qualifying at the British Grand Prix after his Force India was found to be under the minimum weight limit.

The Scot had secured fifth on the grid at Silverstone but his car came in 1.5kg underweight in post-qualifying scrutineering.

Even with a mandatory fuel sample on board, the car weighed only 641.5 kg - which is 0.5 kg below the minimum weight.

After the FIA drained the car of fuel, it was found it weighed just 640kg, two kilogrammes under the limit.

With a 0.5kg tolerance accepted for the scales' accuracy, it was ruled that the car was officially 1.5kg underweight.

After the matter was referred to the race stewards, it was decided that the team had been in breach of the regulations and di Resta was thrown out of the results.

He can now start the British GP from the back of the grid.

It is understood the issue revolved around the weight of di Resta himself after qualifying - as the driver and car are combined to reach the 642kg limit.

There are suggestions that di Resta's weight check at the end of qualifying was 1.5kg below his normal weight - which he had been after free practice.

Although some consideration was given to appealing the matter because of the discrepancy, Force India in the end has decided to accept the verdict - meaning di Resta will start his home race last.

http://www.autosport.com/news/report.php/id/108426

Pos Driver Team/Car
1. Lewis Hamilton Mercedes
2. Nico Rosberg Mercedes
3. Sebastian Vettel Red Bull-Renault
4. Mark Webber Red Bull-Renault
5. Daniel Ricciardo Toro Rosso-Ferrari
6. Adrian Sutil Force India-Mercedes
7. Romain Grosjean Lotus-Renault
8. Kimi Raikkonen Lotus-Renault
9. Fernando Alonso Ferrari
10. Jenson Button McLaren-Mercedes
11. Felipe Massa Ferrari
12. Jean-Eric Vergne Toro Rosso-Ferrari
13. Sergio Perez McLaren-Mercedes
14. Nico Hulkenberg Sauber-Ferrari
15. Pastor Maldonado Williams-Renault
16. Valtteri Bottas Williams-Renault
17. Esteban Gutierrez Sauber-Ferrari
18. Charles Pic Caterham-Renault
19. Jules Bianchi Marussia-Cosworth
20. Max Chilton Marussia-Cosworth
21. Giedo van der Garde Caterham-Renault
22. Paul di Resta Force India-Mercedes

http://www.autosport.com/news/report.php/id/108427

daniel up to fifth place and he starts on the clean side of the track!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...