Jump to content
SAU Community

Recommended Posts

I've got a 34 gtt as well and modded to the days.

But I'm inclined to say it could be a number of things. Boost leak, firing issue..

But 10 pound should be fine ad when my motor was stock was running 14 pound no issues.

Fuel your running on ?

Honestly sounds stupid but try Bp 98 with nulon octane boost with ping resistance and see if there is any difference. Does it feel like fuel cut or boost just hesitates then resumes?

If so I'd say start hunting for boost leak..

If you want to see mods on mine go into rb25 mods and Dyno thread I've posted the most recently

It's been said hundreds of times that everyone's car hits r+r at different boost levels. Some are lucky enough to get away with 14+

Forget the octane booster as it quite often fouls plugs.

+1 for GTSboy's post plus check if the rubber intake pipe is sucking shut

Yup second that actually on the pipe sucking shut.

Forgotten bout all the things stock motors sometimes do. But 10 pound should be fine the 34's come with with the 2 stage solenoid as well ?? Can't remember

But in that being said I've had a shitload of skylines and built Silvia's with rb's they all ran 10 pound and many mates running in excess of 10 psi by stock if I remember right s1 and s2 rb25dets have 2 stage boost solenoid which the high setting is 10 pound so yea

Edited by Cyifly

It's not the boost level itself. It is teh amount of air flowing through the AFM that will trigger R&R. And even that is a variable between cars.

If you have a car with the little cooler, and stock exhaust, you will easily be able to run more boost on it before hitting R&R than if you have less restrictive flow paths in and out.

That should be very obvious.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...