Jump to content
SAU Community

Recommended Posts

I forgot about the ducting photos.

These two arent from an australian supercar they are from a current Newzealand V8 touring car.

They run a controlled Wilwood calliper and controlled brake duct.

Our local supercars use an almost identical ducting setup thats kevlar.

post-20349-0-14902100-1357117305_thumb.jpg

post-20349-0-73487100-1357117306_thumb.jpg

Hi sorry if I might be hijacking your thread, but this seems to be the best place to ask.

I drive a 99 R34 25GT, at the moment it's a daily driver but it's also a long term project car (Engine won't really be touched until I get myself another car for a daily driver).

I've taken it on one track day so far and I'm looking at taking it on the track a couple of times a year if that, nothing too crazy.

But I'm looking at upgrading my brakes with a big brake kit. I was looking at the D2 kits but I'm not sure what I should be getting. Can someone please give me a couple of options on what to get? I'm not sure on rotor sizes either. I'm hopefully getting TE37s soon also so they would have to fit under those..

Thanks for any help in advance

I forgot about the ducting photos.

These two arent from an australian supercar they are from a current Newzealand V8 touring car.

They run a controlled Wilwood calliper and controlled brake duct.

Our local supercars use an almost identical ducting setup thats kevlar.

post-20349-0-14902100-1357117305_thumb.jpg

post-20349-0-73487100-1357117306_thumb.jpg

So is the air and water vapour mixture just directed onto the face of the rotor on that side?

Hi sorry if I might be hijacking your thread, but this seems to be the best place to ask.

I drive a 99 R34 25GT, at the moment it's a daily driver but it's also a long term project car (Engine won't really be touched until I get myself another car for a daily driver).

I've taken it on one track day so far and I'm looking at taking it on the track a couple of times a year if that, nothing too crazy.

But I'm looking at upgrading my brakes with a big brake kit. I was looking at the D2 kits but I'm not sure what I should be getting. Can someone please give me a couple of options on what to get? I'm not sure on rotor sizes either. I'm hopefully getting TE37s soon also so they would have to fit under those..

Thanks for any help in advance

The 330mm D2 kit is the safe bet, they will fit under most 17s. If you want the 355 you will need 18s, the TE37 design is great for caliper clearance and should not be an issue. Really, the question should be what size tyres do you want to run (17s are much cheaper than 18s) then choose the wheel, then choose the larger or smaller brakes to suit. Either kit will be fine unless you use the brakes more than you need to ;)

Brad, we need pics of the other side of the rotor...I'm willing to bet the vent runs to the centre of the disc not the outside face, but that's not how it looks in those pics

here is a couple from both sides of a VY taxi.

This car has a front mounted rack unlike the previous car that was rear mounted.

The ducts on this one are mounted at the front of the upright obviously.

The NZ VY has a very similar thing but smaller.

post-20349-0-25108400-1357169582_thumb.jpg

post-20349-0-28673800-1357169585_thumb.jpg

post-20349-0-21352100-1357169587_thumb.jpg

post-20349-0-44282800-1357169589_thumb.jpg

post-20349-0-49515000-1357169591_thumb.jpg

There is a carbon peice that locates onto the duct which adapts into a 3inch spiral tube to allow the flex before entering very similar kevlar ducting to the front bar.

The kevlar parts from that VY are removed at the moment and being repaired.

lots of space when there is no driveshaft going to the hub eh? Interesting the shape of that final duct, I bet they have done a lot of testing about how much air to aim directly at which part of the disc vs how much to direct at the centre

Real race cars only have two drive shafts Duncan ;)

I wouldn't want to change the ducts that's for sure. That car has done 3 Bathurst 1000 events and finished all 3 times as well as sandown enduros so if say they did something right.

The differences between teams is interesting to look at though.

A lot of the time they run the cars with the ducting blocked off at the bumper.

Spot on the money. There is a properly made up funnel that crates a neat shape that suit the inside of the rotor.

Jacking up a supercar now to take photo of it.

I see said the blind man! Great job Brad, thanks mate.

No kidding with space due to no driveshafts!!!

Anyone wants Alcon rear kit ? SInce they offer free shipping for rear kit, I will order it, and will keep it for spares, but I thought if anyone wants rear too we can drop price little bit http://www.jdl-brakes.com/alcon-adv-extreme-brake-kit-rear-4-pot-o350x28-nissan-skyline-r32-r33-r34-gtr.html

  • 2 weeks later...
  • 2 weeks later...

Anyone wants Alcon rear kit ? SInce they offer free shipping for rear kit, I will order it, and will keep it for spares, but I thought if anyone wants rear too we can drop price little bit http://www.jdl-brake...33-r34-gtr.html

I got mine Alcons from JDL, great service and stuff

These seem to be pretty cheap http://www.ebay.com....=item2ec12dc8e3

Does anyone have experience with them?

I bought my first R32 GTR with Wilwood 330 mm kit on it. It was good, but not better than Brembo from R34 which I fitted few months later. Maybe I had some issue with pads from this kit, and that's why it didn't perform as it should. Anyway, I wasn't happy. It's still my #1 http://www.jdl-brakes.com/special-offer-alcon-adv-extreme-brake-kit-front-and-rear-nissan-skyline-r32-r33-r34-gtr.html

Those wilwoods are a very average setup overall.

The callipers have a terrible open bridge design and they flex horribly. The lug mounts they use also flex a lot if you dont have the callipers spot on centred to the rotor.

I've used them on lighter road cars like MX5's and pulsars in the past with little problems

I fitted a set up to a Toyota 86 a fortnight ago only to remove them after a track day and change over to an AP calliper. The pedal feel was horrendous at 3 corners at Wakefield park.

AP's being tested on Wednesday but already on the road they feel so much nicer under firm braking.

  • 3 weeks later...

I have Alcon front kit with 343 mm rotors, but thinking about these kits http://www.jdl-brakes.com/special-offer-alcon-adv-extreme-brake-kit-front-and-rear-nissan-skyline-r32-r33-r34-gtr.html What wheel do I need to clear 6 pistons calipers with 365 mm rotors ? 18x9 +15 would be ok ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...