Jump to content
SAU Community

Recommended Posts

AFRs were low 10s under WOT which is too low imo. I admit he did fix some of the issues I just don't feel like it was a 100% job. It came back running less boost as asked with the same power so it was positive from that regard.

I'm pretty sure Trojan would have access to a dyno, just not sure which etc. Give John a call and ask. I found him always helpful and knowledgeable.

  Bluprint said:
Trojan use Jake's Performance' dyno don't they?

NJR - Pete basically does most of his tunes a little bit rich to be on the safe side. Do you know what your AFRs were?

I had my Power FC tuned today at Autotech by Ed from Integra. Running a bit more boost now, feels and sounds like a totally new car.

Could not be happier :)

Edited by p1r4t8r
  p1r4t8r said:
I had my Power FC tuned today at Autotech by Ed from Integra. Running a bit more boost now, feels and sounds like a totally new car.

Could not be happier :)

Hey Graham,

Met you y.day at Autotech, how did your final runs go?! Outa interest, have you got a turbo back, or cat back zhaust?

- M

hey mate!

Yeah, it made 195.5kW @12.5psi after the tune, but the power band is much nicer now, a lot more power from the lower rev range, don't need to wrap it out to get it moving.

Pretty sure it's a cat back.

How much did the 200SX end up putting out?

  p1r4t8r said:
hey mate!

Yeah, it made 195.5kW @12.5psi after the tune, but the power band is much nicer now, a lot more power from the lower rev range, don't need to wrap it out to get it moving.

Pretty sure it's a cat back.

How much did the 200SX end up putting out?

Sweeeet, yah when I finally got a PFC, the extra ignition wound into it down low, made it much meatier and responsive.

The S14 made a paltry 190'ish@1bar due to the stock 10yr old coils breaking down. With the new turbo and usual pump, inj, FPR mods, we were hoping for 220-230'ish. Spitfires and a few weeks, we'll be back there :thumbsup:

  Bluprint said:
Trojan use Jake's Performance' dyno don't they?

NJR - Pete basically does most of his tunes a little bit rich to be on the safe side. Do you know what your AFRs were?

yes they do

  • 2 weeks later...
  • 1 month later...

Once again, Marc and the Boys at Belconnen Discount Tyre Service have helped me out again.

Honestly, i can't fault these guys. If you're northside, and want to be looked after for everything but the major stuff - give em a call. Marc has SydneyKid on speed dial if its needed and plus pervin' on his new Stagea is neat too.

Hi Guys,

I'm in the process of packing for the big move from Tamworth to Canberra (living in Queanbeyan/working in Fyshwick) to take up a new job, till now I was wondering where I could find someone who will know and importantly care about my stock R33.

After having a browse through this topic (which started in 2004) and printing off 54 pages I think I will get some answers. Thanks very much for the help guys, greatly appreciated.

By the way, if anyone is in Tamworth and needs a helping hand with a Skyline, or any Jap performance car for that matter, no one does it better than Matt O'Brien at Xcessive Performance - 02 6762 5711 - A real nice guy and top shelf work.

Thanks again for the tips ...

Billishere :)

Hi guys,

Anyone know where i can get my hands on an R32 GTR water pump in canberra? Keen to get it ASAP, either standard or N1. As if i'm not already in enough debt, damn it! Sorry not quite sure if this is the right place for posting parts equiries.

Any help here would be greatly appreciated. just post reply here or u3958752@anu.edu.au

Thanks

- Leon

Billishere, i ended up taking mine to Integra. Originally it was stock and Ed there took great care of it, could never fault their service. Since then i've had a few modifications performed there and had it tuned on the dyno. I've been extremely happy overall.

OzLeroy, try the wanted to buy forum, might get more luck there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...