Jump to content
SAU Community

Recommended Posts

I do get all of my work done at PERFORMANCE GARAGE in phillip by danny he knows his cars thats for sure no job too big or too small, servicing to engine conversions.

have to agree, Danny has done a fair bit of work on my 200 and he's always helpful, honest and very competively priced.

Highly recomend: 0437603885

While I'm replacing my Turbo and putting my Clutch & Brake pedal in I decided to do a bit of maintenance work on the old RB25. While pulling the intake piping apart, I've managed to split quite a few hoses both for oil and intake. Who knows a good place to go to get replacement pipes & so on? I know autobarn have some silicon hoses for the intake, but I was thinking more for the oil lines. Otherwise I'll just go to Nissan and get the factory ones.

  • 2 weeks later...
have to agree, Danny has done a fair bit of work on my 200 and he's always helpful, honest and very competively priced.

Highly recomend: 0437603885

do you know the address at all? can't seem to find them online or in the yellow pages..

I know I sound like a broken record at times on here - But i can't recommend Marc, Stewie and the boys down at Belconnen Discount Tyre Service enough. Sure my car isn't on time - but they get things done properly and keep me informed all the way.

Seriously.

I'd recommend them for anything upto performance tuning/turbo work - even then, i'd probably give them a go.

02 6251 5977

I know I sound like a broken record at times on here - But i can't recommend Marc, Stewie and the boys down at Belconnen Discount Tyre Service enough. Sure my car isn't on time - but they get things done properly and keep me informed all the way.

Seriously.

I'd recommend them for anything upto performance tuning/turbo work - even then, i'd probably give them a go.

02 6251 5977

I concur, they're doing my gearbox conversion for me. It's a bit of a tricky swap but they're still willing to give it a go. It helps that Marc has a manual Stagea already to compare with.

Thx for the tip about Goodyear tyres in Belco, have taken the car there before, but didn't know they specialised in servicing imports to. Very happy with their other work, so may book in the car to get servicing done, as im on the northside as well.

Well the owner has had 2 Stageas now and also an ATESSA Bluebird. I don't know if they specialise in them, but they're certainly getting to know them.

The boys are starting to know them, quite a few skylines are going through there.

I've been looking for a good deal on Turbos for my GTR, so I called COOMA DIESEL and unfortunately had to talk to a very rude, sarcastic woman who not only wouldn't give me even a $50 discount on 2 X $1,500 turbos, but wouldn't even TELL ME WHAT THE PART WAS!!!! unless I agreed to purchase them. I would definately recommend that everyone on this forum stay away from this place.

If anyone knows where to get a good deal on turbos I would love to know. I'm looking for ones around the 300-350 hp mark.

Edited by cactu5

Sadly over the weekend i put a nice big scratch and took a chunk of paint off my front bar and decided it was time to get it resprayed (paint is crackling at the top of it etc... needs some TLC.) i'm not looking to do the whole car, just the bar. Anyone know of a good place to take it?

Sadly over the weekend i put a nice big scratch and took a chunk of paint off my front bar and decided it was time to get it resprayed (paint is crackling at the top of it etc... needs some TLC.) i'm not looking to do the whole car, just the bar. Anyone know of a good place to take it?

whatever your decision is DO NOT go to a place in Fyshwick that starts with N, contains a part of it's name that you put in your hair and is 6 letters long... I only just realised that in certain sunlight the bit's I had re-sprayed didn’t even look black almost a grey :dry:

I've been looking for a good deal on Turbos for my GTR, so I called COOMA DIESEL and unfortunately had to talk to a very rude, sarcastic woman who not only wouldn't give me even a $50 discount on 2 X $1,500 turbos, but wouldn't even TELL ME WHAT THE PART WAS!!!! unless I agreed to purchase them. I would definately recommend that everyone on this forum stay away from this place.

If anyone knows where to get a good deal on turbos I would love to know. I'm looking for ones around the 300-350 hp mark.

mate the best prices I could find were at CRD

Cheers

whatever your decision is DO NOT go to a place in Fyshwick that starts with N, contains a part of it's name that you put in your hair and is 6 letters long... I only just realised that in certain sunlight the bit's I had re-sprayed didn’t even look black almost a grey :D

i cannot figure that out, too cryptic, give me a clue :D

:D well i know we are not allowed to publicaly say the business name i have not directly done it i hope it is allowed to stay. for anyone who does not get who i am talking about feel free to pm me.

i cannot figure that out, too cryptic, give me a clue :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...