Jump to content
SAU Community

Recommended Posts

just for the Shiggles :laugh:

but yeah it's so damn close on colour and it's sporting the same front bar too.

Wish I had my engine out when I resprayed it. looking at how good this one is :/

Lulz were had.

Now to start saving Mwahaha

Tokyo Auto Salon

Checked the head tension today, all good.

Found a small hose had come off, the tiny one under the throttle body. could be my boost problem.

Made a tool for the head bolts, very simple, just chopped a 10mm allen key.

Pic wont load.... anyway i ended up with a 10mm hex shaft and just used a 10mm socket on the torque wrench.

i just finished building one that really couldnt be registered and sold it and bought a WRX as a fun daily with the R33 being a track car seeing as it would cost me a little to much than i would like to get it re registered..........

But now i am considering selling it as the wife is getting a little fed up with the car yard I call a front lawn.

Edited by ScR33m3r

Most I have ever put in mine is about the same at 1.57 a litre. Too close to the bottom to think about it :(

Being $1.71 a litre at the moment it would cost from near empty close to $120

Be nice to go back to a dollar a litre

Nostalga break

I'm so old, when I started pumping fuel it was about 11c-14c a litre.

Shoulda heard people whinge then - Bahahaha

and that paid my wages to check oil, water, tyres, pump fuel and clean windscreens as well as rent on the site and the fuel plus the profit for the owner - WTF!

Nothing like a public holiday for plenty of time to work on the car :)

Just spent this morning cleaning out the afm because I think she's running a little rich. Afm was nice and black and whatnot. Sprayed her out with some brake cleaner and its looking brand new :)

Removed the manual bleed boost controller and set up the standard system so that I can pass my second rego inspection :)

And now to get started on tightening the right handbrake.. 5 minutes in, calipers off now for the rotor.. Which requires getting off that big ass 36mm nut. Turns out biggest we've got here is 32, biggest everyone we have contacted has 32. Supercheap only sells up to 32 and nothing else is open on a public holiday.. Why nissan why!! Still waiting to hear back from a few people about sockets. But all in all, been a not too bad day..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...