Jump to content
SAU Community

Recommended Posts

Til they're tight and then a little bit more... Don't Cross Thread them and Don't Over Tighten ! They can break.

Can give you a hand if you need it. :thumbsup:

Can vouch for my local mechanic. He knows what he's doing.

Until it comes to heat shields ! :P

Just Keeping my cool my man... :D

and how bout you? You figure out how to take the Handbreak off yet? hahahaha...

Haha yeah man - handbreak all the way up because of your A/C running :P

Thanks for the offers of help, I'm going to give it a shot on Saturday solo, just stay tuned for desperate cry's for help, although by then its probably too late :P

What side of town are you at?

Handy Hints:

Tape over or stuff a CLEAN rag in the pipes you just pulled off to get to the head.

If your coil harness is as old as mine, be careful the plugs can be brittle and break.

I find it easier to undo the bits the coils are bolted to, and take it all off in one go. Two bits actually.

With those gone you can get to any nuts or bolts you drop down there, and you can clean spilled oil and stuff easy.

Plugs are pre gapped, this is the easy way to get it right. get the right plugs.

Before removing the plugs, give it a good blow with compressed air and get any bits of crap out.

Those bits of crap can fall into the cylinder or foul the thread for the sparkplug.

The correct way to tighten the plug is explained clearly on the box.

Dont overtighen the coil brakets, its into alloy, so its soft, blue locktight is good.

Dont forget to remove the rags from your pipes (ive done that before haha)

easy peasy japanesy

Rosie in today at Craig Hall in Phillip. Getting suspesion down - legal height and wheel alignment :)

Update: dodgy seller didn't have a "bush" (?) in the front coil overs so that's not getting done today. Break pads instead. Does that mean I need to purchase new front coil overs? He was saying it would be hard to find a bush for the front coil over? :S

Edited by RosieR34

Update: dodgy seller didn't have a "bush" (?) in the front coil overs so that's not getting done today. Break pads instead. Does that mean I need to purchase new front coil overs? He was saying it would be hard to find a bush for the front coil over? :S

do you know the brand of coilover? find out exactly what bush was missing, inline may be able to help you out if you can't source one from a local parts store. - repco can sometimes be handy for things like that.

  • Like 1

do you know the brand of coilover? find out exactly what bush was missing, inline may be able to help you out if you can't source one from a local parts store. - repco can sometimes be handy for things like that.

G4's - one of the front bushes are missing.

assuming you are talking about one of the bushes in the G4 coilover (must be noisy as hell!), you should be able to get what you need from a retailer (just jap) as they can be fully rebuilt.

Yep G4 coilovers - one of the bushes in the front coilovers is missing (Uninstalled). Just Jap sells bushes for G4's? :D brbrbrbrb

Hmm Just Jap doesn't seem to have G4 coilovers / bushes / whatever I was meant to be looking for.

Edited by RosieR34

Yep G4 coilovers - one of the bushes in the front coilovers is missing (Uninstalled). Just Jap sells bushes for G4's? :D brbrbrbrb

Hmm Just Jap doesn't seem to have G4 coilovers / bushes / whatever I was meant to be looking for.

Its funny I've got the same issue with my Tiens, for some reason the front rubber ring that sits at the top of the spring is gone, make it noisy as hell

Yep G4 coilovers - one of the bushes in the front coilovers is missing (Uninstalled). Just Jap sells bushes for G4's? :D brbrbrbrb

Hmm Just Jap doesn't seem to have G4 coilovers / bushes / whatever I was meant to be looking for.

did you give them a call and explain what you were looking for?

did you give them a call and explain what you were looking for?

Nah - they have a very specefic range with suspesion it seems on their website. I'm going to assume they don't stock G4s.

Its funny I've got the same issue with my Tiens, for some reason the front rubber ring that sits at the top of the spring is gone, make it noisy as hell

Welcome to my boat - it's a sucky ride.

Edited by RosieR34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...