Jump to content
SAU Community

Recommended Posts

Old gearbox mount is starting to peel off the rubber.

Looked for the cheapest fix so i put in one of those GKtech solid mounts.

Holy crap it makes the whole car rumble, and the gear whine is full on! And thats only backing up the driveway! :O

Maybe a bit harsh for my liking. I think its more of a full on race car thing.

Braided clutch line in, bit of a pain to bleed it.

Have to test drive and see how it goes.

Edited by D.I.Y. Mik

Solid gearbox mount is too loud, has to go.

Bad shudders under acceleration, some problem that i can now feel cos of the solid mount.

Must diagnose and fix.

Richard, nice wheels, and i have to give back that boss kit sometime.

Edited by D.I.Y. Mik

Replaced my left front upright because old one had damaged eye bolt that the coilover mounts to. Gave everything a nice clean ready for some cruise tomorrow :D

Rob esp are good with safc's so is auto tech hume albeit more expensive

Auto tech is Hume 100% just got my car back from them after being there a week. I'd say I'm happy with Ed's tuning and service. Car is running good. Ed tells me he don't really like haltech but he tuned it so well. I'd defiantly recommend Ed and the Autotech team with out hesitation.

After getting my car back id just like to tip my hat to Adrian and the guys at ultimate tunes for the finishing touches on the GTR. It drives and feels incredible. It has never ran so well. Couldn't be happier.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...