Jump to content
SAU Community

Recommended Posts

I went to pedders dandenong to replace brake pads and one of the employees or the owner himself crashed my car into a metal bench after they finished the job.

They tried to tape it up so I can drive it. Crazy, I ended up with no car maybe for months now and need public transport.

I wouldn't go there anymore for sure, the owner Colin even tried to persuade me to drive the car home with damaged hood grille bumper and side panel. I refused. Colin even told me this accident in his workshop is a regular thing happens every 3 or 4 months. Which is a lie.

I am thinking whether I need to get a solicitor or not. As Colin is getting a friend to panel beat the car and I don't trust the friend.

My car resale value is going to be low. I hope you all avoid pedders dandenong. My christmas and new year plans are ruined now.

Link to comment
https://www.sau.com.au/forums/topic/415737-pedders-dandenong/
Share on other sites

Do you have insurance? If so, get it processed through them so you get the repairs done properly.

How bad is the damage? If it is only minor panel damage then it should be fine to drive as is. they would've had to have hit the bench pretty hard to do any serious damage. I hate to say it, but it kind of sounds like you are over reacting a bit. They would've had to have hit the bench at high speed to make it so you are without a car for a few months

And find out who the friend is. If they work for a panel shop then the work should be done to a reasonable standard.

I doubt your resale will be affected very much unless your car is absolutely perfect and the damage is major. There are plenty of cars getting around that have been crashed that you would never know they had.

Soo you can't drive it because they have damaged suspension?

What's the issue?

Drive it to your panel beater get a quote send the workshop that damaged your car a copy with a letter of demand or better yet if you're insured lodge a claim.

Once it's fixed it will make no difference to your resale value if they do a good job.

Give them the option - either say that you'll go and get three quotes, and they can chose the cheapest - and keep it out of insurance.

OR

If you have full insurance, contact them and explain what has happened - if the owner has admitted he is at fault then it's a simple matter of getting your car repaired through the normal channels and your insurance company will waive your excess and pursue Pedders (their insurance company) for the damages.

Whatever you do, don't get it done through 'his mates' - you will guaranteed get the cheapest patch up job going, and if it's not done through insurance you won't get a warranty on the repairs.

I like the first option - It's a win/win. You can chose a reputable panel shop, and Pedders don't take a hit on their insurance premium. But if they want to play hard ball, then just get your insurance company involved and they can take care of the headaches - after all, that's what you pay them for remember?

P.S. Most unusual first post ever.

Edited by SMOKEYC34

I can see why he doesn't want to drive it. the moment he takes it out of the shop they will turn around and say it was fine when he left.

I would get in writing from the owner that the damage was done by them. once got, take it away, go to a panel beater you want and get a quote. Send him the quote.

Alternatively, as has been said, simply contact your insurance company and give it to them to handle assuming you have one, of course.

  • 1 year later...

After I heard the big crash at the waiting room the whole family took nearly an hour to tell me.

they obviously tried to patch up the car so it looked less damaged and the owner just calmly acted as if it is not a major thing he said he damaged customers car once a month lol.

But it took nearly 4 months before I got back the car and many phone calls

and I still had to pay for the brake pads when I picked up the car.

If I took the car home as suggested by the owner, I am sure he would deny everything or claimed for less damage.

The new pedders brake pads are squeally as well.

And the panel install is not as spot on as the factory install,

and the foam behind the front bumper is missing

It must had been thrown out when it broke apart after the crash.

Just beware if you go to fix your car this thing can happen to anyone and they don't care about you as customers.

Even pedders head office only told me it can't do anything because all it does just to provide a licence but everything else is in the hands of the licencees to come good.

I wouldn't go back that is for sure.

I feel that you simply handled this very poorly. If you have insurance, you should have just got them onto it.

If not, I would have taken photos of it, got them to sign a bit of paper stating they were responsible for the damage, then taken it to a panel beater of your choice, got a quote and handed it to Pedders to resolve. There's no way you should have let them take care of it.

But you live and you learn.

Actually, I imagine by now you have some form of paper work where they have basically admitted liability due to the fact they have at least attempted to fix it. I'd go back to them, tell them the job they did was rubbish and you will be going to your panel beater and getting a quote to fix it properly. They will then be presented with the quote and expected to pay it, lest they end up in court.

It's taken a year and a half to come back to SAU, when in fact you received perfectly good advice in the first place.

To recap...

1) get proof and/or acknowledgement that damage was done onsite by a staff member

2) Get your own insurance company to fix your car whilst the company sees the workshop at fault

3) your insurance company will claim from the workshop's insurance company or from the workshop itself if their insurance has lapsed

NB #3) is what Pedders D'nong was most afraid of!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
    • Ceste, jak se mas Marek...sorry I only have english keyboard. Are you a fan of Poland's greatest band ever?   
×
×
  • Create New...