Jump to content
SAU Community

Recommended Posts

Thought that Mike and I were coming down to your place tomorrow night and then drinking scotch and then going to Yattla for the cruise?
Ha! That would of been good.

Sadly I have already plans with family tomorrow

  • 1 month later...
  • 3 weeks later...

Well run in has been done (so I've been told)

As much as I want to go and get it tuned again I'm saving for suspension parts FTM as a car is only as good as it handles

I will put some minor updates soon ;)

  • Like 1
  • 1 month later...

Alright it has been quite some time since I have updated this build thread

I guess I have been enjoying it, hence why bugger all updates

but this aint true as I have in fact done a bucket load

First up........

I decided to take off the windshield water grill and see what has been lurking under there

so after taking off the mandatory wiper and bonnet bolts and removing them I got this

IMG_0660_zps769ef280.jpg

it wasn't pretty

IMG_0661_zps2697894f.jpg

IMG_0664_zps7df0caf5.jpg

IMG_0666_zps7b98eb43.jpg

so lets get all this cleaned up ;)

  • Like 1

Got my trusty garage vacuum cleaner and started sucking up all the dirt and silt lying within the under there grill

IMG_0667_zpsc2878bf5.jpg

IMG_0668_zpsf79fe553.jpg

IMG_0726_zps10cc773a.jpg

even took these little suckers out for some restoration lol

IMG_0729_zps3370aa74.jpg

after a quick wipe with some warm water and soap and it already started to look a better

but me not being satisfied I wanted to go one step further

IMG_0736_zpsf2f29b4d.jpg

IMG_0844_zps0be6f9b2.jpg

I removed the bolts to the wiper motors (except for the middle one so just tapped it up) and taped up everything else with plastic sheeting

next step was to apply a coat of clear where the windshield grill usually sits

results

IMG_0734_zpsc779bd95.jpg

IMG_0738_zpsd9e834a4.jpg

IMG_0898_zpsc6bd5459.jpg

IMG_0900_zps6787302c.jpg

  • Like 1

IMG_0731_zps61375da7.jpg

managed to clean them plugs rather well and went straight back in their home

IMG_0901_zps1b38e4eb.jpg

whilst I was at it I thought I would pay some attention to the actual grill which looked rather in poor shape

IMG_0886_zpsfc54ad01.jpg

IMG_0888_zps0864a96f.jpg

IMG_0889_zpsc12f2ba0.jpg

After a quick wash with some sugar soap and warm water it looked like this

IMG_0894_zpsac8d2491.jpg

I glued the lip back with some Loctite Precision Super Glue Gel (highly recommend it for delicate applications)

IMG_0891_zps84a3419f.jpg

IMG_0893_zpsd8dfedf0.jpg

Then I applied some Meguiars Plastx to get it to look like this

IMG_0892_zpsdf783d1f.jpg

back in the engine bay - I had some broken studs to take off and rethread

IMG_0869_zps165aaf0a.jpg

after much swearing and broken drill bits I got the bastard out lol

IMG_0868_zps75476492.jpg

IMG_0866_zpsdb94de90.jpg

me and drills - thank Christ I am not a dentist

Time for some rethreading

IMG_0865_zps44174980.jpg

this is actually rather delicate to do and you must turn slowly then reverse slowly to get the right threading technique but I managed very well thanks to Youtube lol

IMG_0870_zps15db47a8.jpg

new stud in place

next up the rear wing

IMG_4882_zps0bf118a2.jpg

thought I would take the rear wing off to detail it...........

lets just say that when I saw this

IMG_4883_zps81c11175.jpg

IMG_4887_zps2134c4bc.jpg

I knew that there was going to need more than just wax and polish

IMG_4885_zpse2166cd5.jpg

IMG_4886_zpsf47abe44.jpg

the rear wing stay brackets were fooked to say the least

IMG_4889_zpsb9057cdf.jpg

IMG_4893_zpscb503641.jpg

IMG_4895_zpsfd80df57.jpg

totally corroded and unusable

the car without the rear wing

IMG_4897_zps93fb00aa.jpg

we will get all this cleaned up too

IMG_4910_zps9993d796.jpg

IMG_4911_zpsdab5806b.jpg

IMG_4914_zps21ea56b5.jpg

ta dah!

a bit of detailing done (cut and polish)

IMG_4918_zps10f4a572.jpg

IMG_4915_zpsa261c6d2.jpg

it sure does have a different appearance without the rear wing

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...