Jump to content
SAU Community

Recommended Posts

  • 1 year later...

So 1 yeah has been and there been some massive progress...

I washed it a few times, repainted the lower lip, made some proper bov delete plates, swapped back to the 720cc injectors and mounted my surge tank properly.

And thats it....

Pretty weak i know but i was playing with other toys.

Reinstalling the 4 channel amp and possibly going to make an airbox this weekend, wont hold my breath though.

Will post a pic or two when i get home.

  • Like 1
  • 2 weeks later...

Started to reinstall the amp two weekends ago, but forgot where i put the power and earth leads so i need to buy new ones. Also have ordered new battery terminals as the old ones have too much stuff coming off them now and look rubbish. Will do a tidy up of the power and earth wiring around the battery while im at it.

Next on the list will be fix a few small interior and exterior trim bits and what not that have annoyed me for too long. Oh and rego, that should be a priority.

  • 2 weeks later...
  • 2 months later...

Nothing much on the update front for this, did a service and replaced the turbo oil feed line on friday night as it was leaking. Has been nice just driving again.

Interior bits and pieces are still a focus, but may need to get the rear diff rebuilt as it has developed a bit too much backlash and clunks a bit.

Tune still hasnt been done. Need a 4bar map sensor and injectors before going for more power, and probably valve springs soon after that.

  • Like 2
  • 1 month later...

Yet another update (mainly so i can look back later and see what i did and when).

Spent a little bit of time on a dyno last week and only managed to compile a list of stuff that needs fixing before i go back on again. On the list is;

1. The poor old tial 38mm wastegate is just too small to control boost properly and needs to be joined by another one.

2. Need to suss out map sensor issues (jumps between 2-3 load points all the time even at constant throttle/load). Have put a filter in the line in the hope that fixes it but have not checked as of yet.

3. Knock sensors are in a land of their own (picking up massive amounts of knock all the time)

4. Wideband needs recalibrating

 

Didnt manage to get any full power runs in as it hits boost cut as soon as the turbo spools. The most we saw was 280awkw @4900rpm before it cut out.

Will get onto fixing stuff after world time attack weekend and report back.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...