Jump to content
SAU Community

Recommended Posts

Hey not sure if this is a topic but I desperately need help.

Ill try to keep it short but basically have a '94 R33 coupe series 1 with a sunroof :) only had her for a few months, bought from a lebanese guy....this is both me nd my partners dream car...so we cleaned her up, black bonnet, sound system etc. he did not look after her at all. We had a good run then problem after problem started.

PROBLEM #

1. Rocket cover leaking - fixed it

2. Hicas light only comes on once the car has been started then turned off for a short period of time. If let for roughly an hour it stays off (still not fixed)

3. Clutch started to squeak nd a tiny plastic bit just fell to the floor inside the car one day (still squeaking but clutch works perfect althought a bit sticky)

4. Driving nicely nd heard this noise like say a dragon flys wings right near ur ear. Tow trucked it home, pulled it all apart harmonica balancer is a bit thrashed out nd the 2 keys that hold it it place nd the crank pulley pretty much weren't there. Aparentl a ceased aircon system can cause it? Replaced those, put her all back together (first didn't even want to start timing woz out, lined all the notches up nd she started) now took her for a run bit sluggish but she still drove, boost leak? Fixed all of them (who ever came up with the 6piece intercooler pipe system should be shot!) cool she ran better nd better with every tweak. Got home turned her off nd there woz with weird bubbling noise coming from the back of the motor my partner thought it woz bottom end but we never bled the radiator system so I thought mayb airbubles. But the tapping/knocking noise is still their i figured it woz the harmonica balancer against the timing case since it looks a bit wonky wen she idles but as the revs pick up the straightens out, it's not a whole heap but just enough for u to notice. Good old YouTube nd partner reckons the noise is definitely death knock. I'm hoping its no or ill cry problem after problem can anyone shed some light coz I'm lost nd I really do not want to get rid of her or spend 3-4k on a rebuild! :'(

Link to comment
https://www.sau.com.au/forums/topic/416557-really-need-help/
Share on other sites

So you had it properly flow tested and made sure its up to the task by a professional?

Because they wear out and their flow rate slows down meaning they run the car but under full load they don't supply enough fuel, which leans the engine out and the bearings get hammered and you get a death knock

So you had it properly flow tested and made sure its up to the task by a professional?

Because they wear out and their flow rate slows down meaning they run the car but under full load they don't supply enough fuel, which leans the engine out and the bearings get hammered and you get a death knock

well no, but im 100% sure its fine coz she guzzles fuel fine (badly needs a tune) lucky to get 250 from a full tank....took her to the mechanics this morning and its coming from the timing cover near the bottom not the actualy engine which just confuses me that bit more

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...