Jump to content
SAU Community

Recommended Posts

I agree, I have been searching for used gear... But to start off I'll be getting into the bracing side of things first then do springs/shocks or coilovers. I don't want the car any lower as it's a pain to park it as it is and I'm teaching my gf how to drive.

Link to comment
https://www.sau.com.au/forums/topic/417327-my-pnm35/page/3/#findComment-6706599
Share on other sites

Soon will be winning soon.

So another tiny update.

Got a double din fasica and an NSA04 I bought these a month ago, before I decided to spend money elsewhere :D.

My rear wiper arm arrived aswell.

post-102369-0-41537500-1358719086_thumb.jpg

is that brand new from nissan? if so....does it cost much? as opposed to buying parts second hand from people.

Link to comment
https://www.sau.com.au/forums/topic/417327-my-pnm35/page/3/#findComment-6717255
Share on other sites

This post interests me.

SHOTGUN!! xD

is that brand new from nissan? if so....does it cost much? as opposed to buying parts second hand from people.

It was $55 from col crawford. I was quoted up to $75 from wreckers, ofcourse that would have most likely included the wiper part aswell. Yes it is brand new.

I always check with the dealer first before I get quotes from wreckers. Also, I was quoted $52 ex for the front seal in the rear diff. Go figure...

Link to comment
https://www.sau.com.au/forums/topic/417327-my-pnm35/page/3/#findComment-6717341
Share on other sites

I'm not having much luck with keeping this car in shape, interior parts are breaking for me :(

Last night I broke one of the cargo net brackets, I still have to get the crack in the dash fixed -.-

so I was on epcdata last night going crazy looking for the handle to release the storage door cause it came with a big scratch. I also found out that the AXIS S definitely has different suspension on paper because I found the part numbers and they are different to stock part numbers, all I need to do is check out the shocks to find a PN on them.

When I spoke to Alex he pointed something out about my headlights appears they have been darkened by Autech. Which I also noticed in some auction pictures after he mentioned it. I hope I'm never in an accident, I'll cry.

So I'm ganna order my replacement brackets and handles hopefully from Nissan.

I've also purchased a plenum spacer.

Link to comment
https://www.sau.com.au/forums/topic/417327-my-pnm35/page/3/#findComment-6727742
Share on other sites

Where did you get the double din fascia from? I have seen a few variations and people saying the AC button quality is not as good as what they pulled out. How do you find that one in comparison?

Link to comment
https://www.sau.com.au/forums/topic/417327-my-pnm35/page/3/#findComment-6727978
Share on other sites

I got it from perry infiniti on ebay, well it has all the oem stickers on it.. If you wanted to I guess you could move the old buttons across. Apparently there are two different double din fascia's nav and non nav, the nav one is a bit longer I think.

I haven't installed it yet, the colour seems to be a bit duller than the one I currently have, doesn't really bother me as long the buttons function as buttons then I'm happy.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=251212096068#ht_4101wt_1163

Yups, done that. Dog broke one of mine.

What did you get?

I got a BLOX racing spacer for $140 shipped. I've read forums from the states that say they haven't had issues. When installing this do you need to drain the coolant??

Link to comment
https://www.sau.com.au/forums/topic/417327-my-pnm35/page/3/#findComment-6728063
Share on other sites

  • 3 weeks later...

Ok, so I've installed my deck and the other bits to get it working. This deck is temporary until I find something I like and the pock I put in was from when I did a din conversion in my pulsar, fit perfect.

The only issue I have was I had no idea that the NSA04 unit didn't route audio from the TV, so I'm either going to make a cable from the 9 pin din to RCA then to 3.5mm stereo (reason for that is for future install of double din head unit with audio and video input) or run RCA's to 3.5mm to aux to the front, still haven't decided.

Also installed telly.

I didn't get a chance to install the BLOX spacer, will hopefully do it in march.

post-102369-0-31534800-1361221948_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/417327-my-pnm35/page/3/#findComment-6756903
Share on other sites

  • 2 weeks later...

Orite

Thanks to Alex the plenum spacer is in. Great results,I kinda feel bottom and mid-range has slight improvements and induction noise because drift.

So in April hopefully I'll have caster bushes, front and rear swaybars with the front brace and the R34 brakes and rotors installed with the scratched up V35 wheels all installed by Jetwreck (U the best) :D Swaybars and brace will supplied by Daleo (Cheers, U also the best).

Oh also went to a place that had lots and lots of Nismo stickers and Nissan :woot::woot: . Got Nismo?? :cheers: Good times.
Big thanks to Alex for today.

Edited by M35woah
Link to comment
https://www.sau.com.au/forums/topic/417327-my-pnm35/page/3/#findComment-6771247
Share on other sites

Hells yeah should call your garage the PNM35 Garage of Schooling.

Also worked out my fuel consumption. 13.63L/100KM. Just filled up 48L got 352KM reason why I filled up is because my fuel gauge is way out and said I was at 3/4 of a tank. If I can be bothered I'll have a guise for the float thing that Alex told me about.

Link to comment
https://www.sau.com.au/forums/topic/417327-my-pnm35/page/3/#findComment-6772045
Share on other sites

  • 1 month later...

Soooo front and rear swaybars are installed, along with the caster bushes. I forgot to get pics :(. But if you can imagine what swaybars would look like on a stag, that's how mine looks :P

Heaps less roll. Doesn't feel like a tonne of weight is transferred anymore when going around a corner, tyres scream when going round round abouts :D.
Thanks heaps Craig. You the best. Did I mention full hard? Coz racecar. Even though the day was full of PNM35 bashing I still had fun :P.

I won a set of Bilstein shocks and they hopefully will come with a rear brace :D. Still thinking if I should try with stock springs or go with Nismo springs.

Craig also found something interesting while under my car. First thing he said "I wonder if I can take it and put it on my car." lol.

2013-04-06094451_zps8c2172dd.jpg

2013-04-06094413_zpsdd54b102.jpg

Craig thought it would be to do with lights. I mentioned that I've seen my headlights move up and down while stopped in traffic.


I've done research and came up with bugger all, But after a google search it came with 'Control headlight aiming', So I'm going to assume some sort of headlight level correction thingo.

Should have tested it while it was up.

Edited by M35woah
Link to comment
https://www.sau.com.au/forums/topic/417327-my-pnm35/page/3/#findComment-6807315
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...