Jump to content
SAU Community

Recommended Posts

So I've recently had my Nismo Coppermix Twin plate installed in the GTR and I'd read so much about them being very drivable and stock like.

Now I've only driven maybe 50kms so may be too early and may need bedding in, but immediate impressions are that it is very... very light. Doesn't feel like it will hold power, almost feel like I need to take the booster off to get more feel. But it's very quiet and seems very strong. It's very quiet in neutral or with clutch dissengaged.

Now my question is for those who run one, is it normal for it to cause some driveline judder on gradual take up? My searches are suggesting no, however I have read that this is commonplace on twins. I can drive around it of course by taking it up with more revs, but wondering if I should be looking into replacing gearbox or engine mounts or if this may be considered normal. My old Clutch had a very slight judder only when cold.

What do you think?.

That's what makes the Nismo Coppermix so driveable. It's not filthy heavy like a OS twin plate for example which over time is like kicking a bag of sand over and over.

The first 500-1,000kms it will be a little bitey, it will settle down though. So give it a little while before worrying about minor shudder.

it says that these clutches make noise and vibrations

Yeah just so that when it does make the slightest noise (and it literally is non-existent) - people dont come back and complain.

As the plates get lower/wear they will get noisier, just how it goes.

My only complaints are it's a bit rattly on idle in neutral (clutch out) because of the flywheel, and slips a bit when cold, aside from that it's brilliant, very light to use and bites hard on high RPM take-offs...

Edited by Iron Chef

I've got one and I could not fault it in any way. When it was installed it was very 'bitey' (probably me just getting used to a twin) but I did get it adjusted (dunno what was done) and it was so much easier to use. No noises what so ever. Not heavy. Very user friendly. No driveline shudder under any circumstances.

Have only launched in 2WD mode but it was a 2nd gear start from standstill. No dramas and was really easy to modulate.

Ace clutch. Should be for the money.

Ive got the Coppermix Twin C-spec in mine and have nothing but praise for it. By far the easiest twin plate I have ever driven and at the same time has a real good bite to it. A few of the guys have mentioned noise issues - you can hear it on the odd occassion in neutral however its pretty subtle and honestly nothing to lose sleep over.

Give it about 500km or so of driving (start/stop as opposed to highway kms) before you give it a launch, I guarantee you it will definately "hold the power" ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...