Jump to content
SAU Community

Recommended Posts

Howdy,

I have a car taking up room in my carport as well as a heap of other bits and pieces so everything must go ASAP to make some room!!!

It's a white R33 skyline series 1 1993-1995 with series 2 1996-1997 parts also available as well as random RB30 bits which I have collected over the years!! All prices negotiable, but please no time wasters, if you need anything just post or PM! I dont bite!!

Located in Blacktown minutes off M4, M7 and 10 minutes from M2 I can post at buyer expense depending on what it is.

Prices listed below, will post up additional pics as soon as I pull everything off, all bits are in good working condition unless stated otherwise, if you have concerns please just ask.

GT3071R Ball bearing Turbo w/ internal wastage and actuator Kit which includes:

  • Includes braided oil line
  • Custom 4 inch intake pipe with provisions to match all factory R33 intake pipe
  • BLITZ pod filter
  • Adaptor plate
  • Xforce high flow dump pipe and o2 sensor
  • Great condition perfect blades and no shaft play 10 000kms old - spools up great no lag on RB25 - good for 290rwkw $1,500

Turbo specs verified by GCG -

  • Ball bearing
  • Oil & water cooled
  • T25 turbine inlet flange
  • 5 Bolt turbine outlet flange
  • 400hp - 450hp
  • 0.86a/r Turbine Housing
  • 0.50a/r Compressor Housing
  • 4" Compressor Inlet
  • 2" Compressor Outlet
  • HKS GT2835R Equivalent

post-30339-0-78209200-1360219455_thumb.jpeg

post-30339-0-62858300-1360219470_thumb.jpeg

[post-30339-0-34612500-1360219511_thumb.jpeg

post-30339-0-77277900-1360219503_thumb.jpeg

Manual box R33 Turbo 5 speed box - great condition shifted perfectly - $1,100

R33 Engine RB25DET, long motor with no bolt-ons - 150 000kms - ran great - $1,000

post-30339-0-33207500-1360219423_thumb.jpeg

HKS Genuine Super drager muffler 3inch system inc hi flow CAT and 2 mufflers mid way - excellent condition - sounded tough but not too loud - nice and quiet, can be made louder by removing muffler - $500

post-30339-0-13004300-1360219610_thumb.jpeg

Series 2 front Bar - slight dent on front and pre cut for cooler $150

Series 2 headlight left good condition $300

Series 2 headlight right good condition $300

Series 2 reo $100

post-30339-0-80235100-1360219532_thumb.jpeg

Wolf ECU - $500

Blitz 850cc Injectors in stock rail - $450

GFB Blow OFF Valve with RB adaptor plate - plumb back or trumpet changable - volume adjustable/plumback adjustable at the turn of a dial - $220

16 inch R32 GTST wheels and tyres 90% tread $450

Series 2 Bonnet - straight as - perfect - $400

17x7 inch wheels and tyres 80% tread $300

post-30339-0-10499500-1360219648_thumb.jpeg

HYBRID Front mount intercooler kit - needs a clean/polish $100

UNDERODY - brakes suspension etc.

Front callipers $270

Rear 5 stud hubs $120

Handbrake setup $150

Manual LSD 4:11 tight $200

Driveshafts $180

Stock suspension $150

Rear callipers $140

Front strut brace aftermaket CUSCO? $100

Front lower control arms pair $100

Front rotors $50

Rear rotors $50

Castor rods $50

Front 5 stud hubs $50

Rear lower control arms $50

BODY

post-30339-0-76123500-1360219563_thumb.jpeg

post-30339-0-67879800-1360219593_thumb.jpeg

post-30339-0-51298400-1360219629_thumb.jpeg

Spacesaver $40

Side skirts custom $120

Rear pods $100

Front windscreen $100

Left foggies/blinker $80

Rear windscreen $80

Front guard left $60

Front guard right $60

Door Rubbers full set $70

Series 2 Grill $50

Rear wing series 2 style but a little taller aftermarket? $50

Quarter windows $50

Front door windows $50

Mirrors $40

Tail light left $40

Tail light right $40

Rear garnish $40

Bootlid $40

GTST Badges $40

Genuine Nissan Scissor Jack $40

Mirrors $40

Left Door $30

Right Door $30

Rear bumper $30

Wipers and motors $30

ENGINE BAY

Manual Conversion bits $200

Air con compressor $120

Polished Surge tank setup with Bosch 040 pump $120

OEM Coilpacks $100

S1 engine loom $100

Steering rack $100

Sard Fuel Pressure Regulator FPR with gauge $100

post-30339-0-15500700-1360219578_thumb.jpeg

Power steer rack $80

Radiator $80

Tailshaft $80

Engine mounts $70

Alternator $70

Brake master cylinder $60

Radiator shroud $40

Power Steer bottle and hoses $40

Washer bottle $20

Radiator overflow bottle $20

Fuse box lid $20

RB25 Exhaust manifold $100

INTERIOR

post-30339-0-93900500-1360219542_thumb.jpeg

post-30339-0-62413400-1360219551_thumb.jpeg

post-30339-0-70982000-1360219662_thumb.jpeg

Dash cluster 150xxxkms - worked perfect $120

Drivers side window motor $100

Jap steering boss kit and AUTOTECHNICA wheel $100

Boot trims complete - need a clean$100

Instrument cluster with vents $80

Seatbelts $80

Floor mats front 2 only in checkered series 2 style $80

Ignition barrell and locks $80

Drivers side window switch $60

S1 Door trims and quarter trims - slight marks $50

Passeneger side window motor $50

Series 1 Front seats $50

Steering column surround $50

Gear selector surround and boot $40

Center console $40

Climate control unit $30

Rear seat $30

Rear parcel shelf/child restraints/factory speaker grill $30

Indicator switch $20

Wiper switch $20

Cheers!

Hey mate, do you have the cabin fan available?

do you meant he black on for the AC? and if so yes $40? give me a call or sms 0402*842*180

Are the injectors for rb25?

Yes they are for rb25 in rb25 rail with plugs and everything to plug and play

Hey mate im after the bare doors if theres not dents or scratches and drivers power window switch if its good condition...

have all of them to give me a call or sms 0402*842*180

post-30339-0-68525900-1360396784_thumb.jpg

Boot trims $100 comes with everything

post-30339-0-09119800-1360396800_thumb.jpg

Excedy heavy duty clutch Sports tuff

Near new barely used taking out of parted vehicle, also inlcuding fresh machined flywheel $450 for the lot ONO

post-30339-0-11450700-1360396817_thumb.jpgpost-30339-0-60663200-1360396830_thumb.jpg

Polished Surge tank setup with Bosch 040 pump, comes with all wiring relay and ready to plug and play - fits perfect behind back seats in R33 $120

post-30339-0-67333400-1360397576_thumb.jpg

post-30339-0-43071600-1360397592_thumb.jpg

post-30339-0-74475000-1360397607_thumb.jpg

GFB Blow OFF Valve with RB adaptor plate - plumb back or trumpet changable - volume adjustable/plumback adjustable at the turn of a dial - $220

post-30339-0-63214000-1360397701_thumb.jpg

post-30339-0-65176400-1360397813_thumb.jpg

Complete wreck available!

post-30339-0-14158400-1360396847_thumb.jpg

Sold all below

Turbo kit - still have dump pipe to fit stock turbo

Left headlight

Left foggy blinker

Wiper motor

Grill

Strut brace

Boot trims

hi mate will take the surge tank setup can you give me a call tomorow sometime to sort out payment and postage. cheers 0403423121 Dean

hi mate will take the surge tank setup can you give me a call tomorow sometime to sort out payment and postage. cheers 0403423121 Dean

Will do

Injectors still available

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...