Jump to content
SAU Community

Recommended Posts

Howdy,

I have a car taking up room in my carport as well as a heap of other bits and pieces so everything must go ASAP to make some room!!!

It's a white R33 skyline series 1 1993-1995 with series 2 1996-1997 parts also available as well as random RB30 bits which I have collected over the years!! All prices negotiable, but please no time wasters, if you need anything just post or PM! I dont bite!!

Located in Blacktown minutes off M4, M7 and 10 minutes from M2 I can post at buyer expense depending on what it is.

Prices listed below, will post up additional pics as soon as I pull everything off, all bits are in good working condition unless stated otherwise, if you have concerns please just ask.

GT3071R Ball bearing Turbo w/ internal wastage and actuator Kit which includes:

  • Includes braided oil line
  • Custom 4 inch intake pipe with provisions to match all factory R33 intake pipe
  • BLITZ pod filter
  • Adaptor plate
  • Xforce high flow dump pipe and o2 sensor
  • Great condition perfect blades and no shaft play 10 000kms old - spools up great no lag on RB25 - good for 290rwkw $1,500

Turbo specs verified by GCG -

  • Ball bearing
  • Oil & water cooled
  • T25 turbine inlet flange
  • 5 Bolt turbine outlet flange
  • 400hp - 450hp
  • 0.86a/r Turbine Housing
  • 0.50a/r Compressor Housing
  • 4" Compressor Inlet
  • 2" Compressor Outlet
  • HKS GT2835R Equivalent

post-30339-0-78209200-1360219455_thumb.jpeg

post-30339-0-62858300-1360219470_thumb.jpeg

[post-30339-0-34612500-1360219511_thumb.jpeg

post-30339-0-77277900-1360219503_thumb.jpeg

Manual box R33 Turbo 5 speed box - great condition shifted perfectly - $1,100

R33 Engine RB25DET, long motor with no bolt-ons - 150 000kms - ran great - $1,000

post-30339-0-33207500-1360219423_thumb.jpeg

HKS Genuine Super drager muffler 3inch system inc hi flow CAT and 2 mufflers mid way - excellent condition - sounded tough but not too loud - nice and quiet, can be made louder by removing muffler - $500

post-30339-0-13004300-1360219610_thumb.jpeg

Series 2 front Bar - slight dent on front and pre cut for cooler $150

Series 2 headlight left good condition $300

Series 2 headlight right good condition $300

Series 2 reo $100

post-30339-0-80235100-1360219532_thumb.jpeg

Wolf ECU - $500

Blitz 850cc Injectors in stock rail - $450

GFB Blow OFF Valve with RB adaptor plate - plumb back or trumpet changable - volume adjustable/plumback adjustable at the turn of a dial - $220

16 inch R32 GTST wheels and tyres 90% tread $450

Series 2 Bonnet - straight as - perfect - $400

17x7 inch wheels and tyres 80% tread $300

post-30339-0-10499500-1360219648_thumb.jpeg

HYBRID Front mount intercooler kit - needs a clean/polish $100

UNDERODY - brakes suspension etc.

Front callipers $270

Rear 5 stud hubs $120

Handbrake setup $150

Manual LSD 4:11 tight $200

Driveshafts $180

Stock suspension $150

Rear callipers $140

Front strut brace aftermaket CUSCO? $100

Front lower control arms pair $100

Front rotors $50

Rear rotors $50

Castor rods $50

Front 5 stud hubs $50

Rear lower control arms $50

BODY

post-30339-0-76123500-1360219563_thumb.jpeg

post-30339-0-67879800-1360219593_thumb.jpeg

post-30339-0-51298400-1360219629_thumb.jpeg

Spacesaver $40

Side skirts custom $120

Rear pods $100

Front windscreen $100

Left foggies/blinker $80

Rear windscreen $80

Front guard left $60

Front guard right $60

Door Rubbers full set $70

Series 2 Grill $50

Rear wing series 2 style but a little taller aftermarket? $50

Quarter windows $50

Front door windows $50

Mirrors $40

Tail light left $40

Tail light right $40

Rear garnish $40

Bootlid $40

GTST Badges $40

Genuine Nissan Scissor Jack $40

Mirrors $40

Left Door $30

Right Door $30

Rear bumper $30

Wipers and motors $30

ENGINE BAY

Manual Conversion bits $200

Air con compressor $120

Polished Surge tank setup with Bosch 040 pump $120

OEM Coilpacks $100

S1 engine loom $100

Steering rack $100

Sard Fuel Pressure Regulator FPR with gauge $100

post-30339-0-15500700-1360219578_thumb.jpeg

Power steer rack $80

Radiator $80

Tailshaft $80

Engine mounts $70

Alternator $70

Brake master cylinder $60

Radiator shroud $40

Power Steer bottle and hoses $40

Washer bottle $20

Radiator overflow bottle $20

Fuse box lid $20

RB25 Exhaust manifold $100

INTERIOR

post-30339-0-93900500-1360219542_thumb.jpeg

post-30339-0-62413400-1360219551_thumb.jpeg

post-30339-0-70982000-1360219662_thumb.jpeg

Dash cluster 150xxxkms - worked perfect $120

Drivers side window motor $100

Jap steering boss kit and AUTOTECHNICA wheel $100

Boot trims complete - need a clean$100

Instrument cluster with vents $80

Seatbelts $80

Floor mats front 2 only in checkered series 2 style $80

Ignition barrell and locks $80

Drivers side window switch $60

S1 Door trims and quarter trims - slight marks $50

Passeneger side window motor $50

Series 1 Front seats $50

Steering column surround $50

Gear selector surround and boot $40

Center console $40

Climate control unit $30

Rear seat $30

Rear parcel shelf/child restraints/factory speaker grill $30

Indicator switch $20

Wiper switch $20

Cheers!

Hey mate, do you have the cabin fan available?

do you meant he black on for the AC? and if so yes $40? give me a call or sms 0402*842*180

Are the injectors for rb25?

Yes they are for rb25 in rb25 rail with plugs and everything to plug and play

Hey mate im after the bare doors if theres not dents or scratches and drivers power window switch if its good condition...

have all of them to give me a call or sms 0402*842*180

post-30339-0-68525900-1360396784_thumb.jpg

Boot trims $100 comes with everything

post-30339-0-09119800-1360396800_thumb.jpg

Excedy heavy duty clutch Sports tuff

Near new barely used taking out of parted vehicle, also inlcuding fresh machined flywheel $450 for the lot ONO

post-30339-0-11450700-1360396817_thumb.jpgpost-30339-0-60663200-1360396830_thumb.jpg

Polished Surge tank setup with Bosch 040 pump, comes with all wiring relay and ready to plug and play - fits perfect behind back seats in R33 $120

post-30339-0-67333400-1360397576_thumb.jpg

post-30339-0-43071600-1360397592_thumb.jpg

post-30339-0-74475000-1360397607_thumb.jpg

GFB Blow OFF Valve with RB adaptor plate - plumb back or trumpet changable - volume adjustable/plumback adjustable at the turn of a dial - $220

post-30339-0-63214000-1360397701_thumb.jpg

post-30339-0-65176400-1360397813_thumb.jpg

Complete wreck available!

post-30339-0-14158400-1360396847_thumb.jpg

Sold all below

Turbo kit - still have dump pipe to fit stock turbo

Left headlight

Left foggy blinker

Wiper motor

Grill

Strut brace

Boot trims

hi mate will take the surge tank setup can you give me a call tomorow sometime to sort out payment and postage. cheers 0403423121 Dean

hi mate will take the surge tank setup can you give me a call tomorow sometime to sort out payment and postage. cheers 0403423121 Dean

Will do

Injectors still available

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...