Jump to content
SAU Community

Recommended Posts

Hey guys,

Unfortunately, last night I hit a gutter in the wet, and my front left wheel has seen better days. :Oops: It looks as though the suspension is all bent and I couldnt even drive it home as the wheel is unsiure which way it should be pointing :ghost: While I am upset and the like, life has to go on and now I need to get it fixed.

I'm sure i'm not the only person who has ever lost to the curb, and I was wondering just how much this is going to cost me to get fixed. I'm guessing I need my front left suspension rebuilt, possibly the steering arm is bent too. (can't tell at this stage).

The only positive side out of it is that I didn't sustain any panel damage as I wasn't travelling particularly fast, just a dud roundabout, wet road, little bit of stupidity mixed in for an expoensive ****tail of lesson learnt.

Any suggestions would be appreciated!

Thanks.

P.s. anyone got a stocker rim going cheap!?

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/
Share on other sites

Ahhh the dreaded gutter.

Almost EVERYONE runs their skyline into a gutter of sum sort during their life.

I did :D

Mine doesnt sound as back as yours is tho. How hard did you hit it?

Mine was expensive tho because at the time my front bar was really low, so ofcourse the entire front bar was ripped off which in turn cracked my headlights and moved my two front quarter panels.

I didnt do any suspension damage thanks to my hard teins :P

All up mine was about $2k to fix, but this included some other things like a full buff and polish of the car, new front bar.. etc

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-859671
Share on other sites

yea i was thinking around a grand aswell... i have no idea how i didnt rip the front bar off/smash side skirts etc, but somehow, its just the front left completely farked. :D By the sounds of it, im in good company though. i was expecting to be mocked and berated :P but then i realised it was a skyline site hehe

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-859691
Share on other sites

i smacked into the curb in the wet about 3-4 weeks back too. poped my left tyre so ended up gettin some cheap rims to replace the stockies. got a wheel alighnment to straighten the steering wheel but now it drives worse then before the allignment having a mind of its own when i decide to boost and change lanes. visual inspection shows nothing bent but i aint no expert......can anyone recomend a good suspension place in melb??

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-860076
Share on other sites

depending on what is bent, if you know the right places to look it won't cost too much.

control arm- $195

sway bar link - $30

radius rod - $95

radius rod mount - $50

strut + spring - $150

steering rack end - $110

r33 standard rim - $80

so for parts you will be looking at $700. if you can install all the stuff your self (isnt that hard!) it should be a cheap fix!

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-860256
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Your other option is to buy a spray can of hi-fill and prime it with some pinholes. See if the primer makes them disappear. If it does, then you can leave it with pinholes of that size and they will go away when the painter takes over.
    • Ah ok. I seem to be mixing it like everyone else does so not sure what's happening. Will experiment with it more.
    • Depends on what you mean by OK. First up, was this done cold or hot? Are they reasonably consistent? Yes, they are reasonably consistent. Could be better. But unless it has had a build at some point, it is a ~30 year old engine and you'd expect some variation. Some of the difference could also be in user technique Is it good compression? Well....not numerically, no. New they were >160 psi. The one at 140 would be fine, in that context. If they were all ~140, you'd be reasonably happy. But the one that is @120 is twice as far down from the original numbers as the one @ 140. But.. (again)... technique can play a part in the absolute magnitude of these numbers, and the quality/state of repair/accuracy of the pressure gauge is not known. In the context of the above, the compression tester that was used last on my car is regularly compared to a known good pressure gauge. Not calibrated, exactly, but compared to a reference instrument that is not used for any other purpose, so cops no abuse. So we can trust the measurements off that tester. But another tester in the same workshop wasn't being compared against the standard and was reading a good 30ish psi lower. When you're reading 100 psu but the engine is really doing 130, you can make bad decisions.
    • More likely from tiny bubbles in the filler/putty. Maybe be less aggressive when mixing it. Perhaps invest in a vacuum chamber to pull the air bubbles out?** **I don't know if this is a thing for body filler. I see hardcore epoxy makers degassing their mixed resin on the regular.
    • IIRC, the speedo on these is fed from the sensor in/on the snout of the diff.
×
×
  • Create New...