Jump to content
SAU Community

Recommended Posts

Hey guys,

Unfortunately, last night I hit a gutter in the wet, and my front left wheel has seen better days. :Oops: It looks as though the suspension is all bent and I couldnt even drive it home as the wheel is unsiure which way it should be pointing :ghost: While I am upset and the like, life has to go on and now I need to get it fixed.

I'm sure i'm not the only person who has ever lost to the curb, and I was wondering just how much this is going to cost me to get fixed. I'm guessing I need my front left suspension rebuilt, possibly the steering arm is bent too. (can't tell at this stage).

The only positive side out of it is that I didn't sustain any panel damage as I wasn't travelling particularly fast, just a dud roundabout, wet road, little bit of stupidity mixed in for an expoensive ****tail of lesson learnt.

Any suggestions would be appreciated!

Thanks.

P.s. anyone got a stocker rim going cheap!?

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/
Share on other sites

Ahhh the dreaded gutter.

Almost EVERYONE runs their skyline into a gutter of sum sort during their life.

I did :D

Mine doesnt sound as back as yours is tho. How hard did you hit it?

Mine was expensive tho because at the time my front bar was really low, so ofcourse the entire front bar was ripped off which in turn cracked my headlights and moved my two front quarter panels.

I didnt do any suspension damage thanks to my hard teins :P

All up mine was about $2k to fix, but this included some other things like a full buff and polish of the car, new front bar.. etc

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-859671
Share on other sites

yea i was thinking around a grand aswell... i have no idea how i didnt rip the front bar off/smash side skirts etc, but somehow, its just the front left completely farked. :D By the sounds of it, im in good company though. i was expecting to be mocked and berated :P but then i realised it was a skyline site hehe

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-859691
Share on other sites

i smacked into the curb in the wet about 3-4 weeks back too. poped my left tyre so ended up gettin some cheap rims to replace the stockies. got a wheel alighnment to straighten the steering wheel but now it drives worse then before the allignment having a mind of its own when i decide to boost and change lanes. visual inspection shows nothing bent but i aint no expert......can anyone recomend a good suspension place in melb??

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-860076
Share on other sites

depending on what is bent, if you know the right places to look it won't cost too much.

control arm- $195

sway bar link - $30

radius rod - $95

radius rod mount - $50

strut + spring - $150

steering rack end - $110

r33 standard rim - $80

so for parts you will be looking at $700. if you can install all the stuff your self (isnt that hard!) it should be a cheap fix!

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-860256
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...