Jump to content
SAU Community

Recommended Posts

Hey SAU'ers,

I need some help

My R33 gtst wont start or even crank. I just get a clicking sound.

My internet searches suggest it maybe a faulty immobiliser, alternator, or battery ?

I haven't driven it in a few weeks so I checked the battery it was 10.25v

will check alternator but If anyone has had this problem or have any suggestions

Would be very helpful

Link to comment
https://www.sau.com.au/forums/topic/419930-ecr33-wont-start-clicking/
Share on other sites

give it a jump start mate... should fire up.

yeah but it's in the garage and driveway is up hill lol

Do you thinks its battery/alternator or immobiliser related

It doesn't every turnover once just starts clicking

Edited by dyl33

battery mate..... had it a few times after leaving the car for a couple of weeks with the alarm on.... jump start it if you can or take the battery out and charge it.. should be fine. take it for a good run then test the voltage again.

if you have another car, just take the battery out of that one and chuck it into your 33 to check if its battery. definitely sounds like it. if your car starts right up then just go out and buy another battery!

just did this on the weekend.

if you have another car, just take the battery out of that one and chuck it into your 33 to check if its battery. definitely sounds like it. if your car starts right up then just go out and buy another battery!

just did this on the weekend.

do this. but dont buy a new battery. get it discharge tested. could just need a good charge. dont waste 150 bucks.

do this. but dont buy a new battery. get it discharge tested. could just need a good charge. dont waste 150 bucks.

yeah, true that. thing is, my car is drive only on weekends and it's been fine for the entire time i've had it (2 months since i bought it) but 2 weeks ago it started to startup quite roughly. and on driving at night, i thought my interior lighting seemed a bit dimmer than usual...not to mention when i flicked on the high beams, my entire electronics seemed to dim and it sounded like my car nearly stalled. so nek morning i went and changed the battery. may have wasted 150$ but at least now i know this battery is brand new, previous owner wasn't the best...

if it's at 10v then the battery is completely dead. it has dropped a cell. charging won't do a thing.

a healthy battery should handle only being driven on weekend, or every second or 3rd weeknd just fine. i had an old vh commodore that i didn't start for 3 months. the battery was still fine when i hopped in to move it to mow the lawn.

and yeah, if your lights dim, etc, then your alternator is shagged, or the wiring is.

Its straight up a flat battery, just get a jump pack start it up, leave it running for a good 15 mins or drive it around, turn it off and try starting it after an hour, if it doesnt start you just need a new battery.

If it was the starter motor or alternator you would only get one click

wwwwtffffffffff

car started fine last week and today but then middle of the day tried to start and it sounded exactly like it was struggling to start before i changed the battery.

now i think it might be alternator/wiring as mad082 said above aaaaarrrrrrrgggggghhhhh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...