Jump to content
SAU Community

Recommended Posts

Hey guy.

Was looking at my recently purchased C34 yesterday and noticed what I thought was a funny setup with the fuel hoses. In the engine bay it goes from hard line to soft line, then to the Tomi fuel reg then to the fuel rail. Then what I assumed was the return line to the tank, coming out of near the firewall, was the fuel filter. Do the rb25det neos run like this or has an idiot assembled it wrong?

My guess is the latter as it doesn't appear to make sense otherwise.

Cheers,

- Lance

Link to comment
https://www.sau.com.au/forums/topic/420119-c34-fuel-setup/
Share on other sites

On the S1 ( I still have stock set-up) the fuel system goes like this:

The hard pipe goes to a fuel filter mounted in the engine bay near the RH strut tower and a rubber hose goes to the back (firewall) end of the fuel rail. There is a fuel regulator (still using the stocker) at the front end of the fuel rail and a rubber hose goes from there to a damper mounted just behind the filter and the return goes from there to the tank.

Link to comment
https://www.sau.com.au/forums/topic/420119-c34-fuel-setup/#findComment-6758207
Share on other sites

Okay thanks for that.

Mine isn't standard so it's hard for me to tell how it's meant to be. Does the fuel go in from the front or rear of the fuel rail? At the moment mine goes from the hard line, to a rubber line into the filter, then through the Tomei fuel pressure regulator (mounted on the drivers side strut tower) via rubber line into the front of the fuel rail. Then a rubber pipe comes off the back of the rail to the hard return line.

- Lance

Link to comment
https://www.sau.com.au/forums/topic/420119-c34-fuel-setup/#findComment-6758386
Share on other sites

Okay thanks for that.

Mine isn't standard so it's hard for me to tell how it's meant to be. Does the fuel go in from the front or rear of the fuel rail? At the moment mine goes from the hard line, to a rubber line into the filter, then through the Tomei fuel pressure regulator (mounted on the drivers side strut tower) via rubber line into the front of the fuel rail. Then a rubber pipe comes off the back of the rail to the hard return line.

- Lance

No the regulator is at the end of the rail thus pressurising the rail. Its possible yours is plumbed wrongly. Have you pulled off a hose and turned on the pump to confirm where the fuel is coming from? Maybe you are returning fuel via the filter! Does your car run properly??!

Link to comment
https://www.sau.com.au/forums/topic/420119-c34-fuel-setup/#findComment-6759164
Share on other sites

I've re done it all last night. The car was surprisingly running well even with the fuel filter on the return line, and backwards. Now I've got it going from the hard line, to rubber through the filter, into the back of the fuel rail. From the fuel rail to rubber to the reg, then rubber down to the hard return. Sound alright?

Cheers,

- Lance

Link to comment
https://www.sau.com.au/forums/topic/420119-c34-fuel-setup/#findComment-6759178
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I also used Knox driveshafts when I the slip yoke T56 to the 3bolted TR6060 type. I believe I was one of his first jobs as it literally changed hands when I was there, started by the old owner and finished by the new. Everyone seemed pretty great about it. So wasn't shy/seemed pretty knowledgeable when dealing with weird custom people like me.
    • Just a reminder orange park was cool back in the day   and drifting the main circuit was even cooler   f**k I miss that car  
    • We used Knox Drive shafts years ago when we were doing gravel rally, good guy but I heard it had changed hands? He's got a lot of stuff and is miles cheaper than GJ and so on. He used to have a lathe setup with a MIG torch on the tool holder so he could get the uni welds just right, quite a clever guy. I just got a driveshaft done for my sequential installation and that was through Balancing Services Australia in Preston, they did the Gibson cars in the old days. New genuine CV's, billet yoke, new centre bearing and chome moly shaft was $2k.
    • Thanks for sharing that mate, I've got a couple of spares on the shelf but all the unis are tight....will give old mate a shout. BTW are you sure it wasn't just a $400 paint job? Any detail of what they replaced (cut/reweld?)
    • Yeah I saw that about the US Q50 recently, apparently it was shown to Inifiniti dealers (probably to help with their depression about the cars they can sell). Seemed like a really obvious step to me, the platforms are very similar in many ways. Even if there aren't many people who actually put the money up it should really help with image/reputation. What hasn't been clear anywhere if that is a V38 model of if they are just going to add the trans as an option in a new model year. What they did with the Z from 370z to "Z" is just weird so I'd be surprised if they released this as a V38. Great news for me to have an option; it is far from confirmed that I can get any decent track sessions through the auto so having a manual I can swap to is great.
×
×
  • Create New...