Jump to content
SAU Community

Recommended Posts

Hey guy.

Was looking at my recently purchased C34 yesterday and noticed what I thought was a funny setup with the fuel hoses. In the engine bay it goes from hard line to soft line, then to the Tomi fuel reg then to the fuel rail. Then what I assumed was the return line to the tank, coming out of near the firewall, was the fuel filter. Do the rb25det neos run like this or has an idiot assembled it wrong?

My guess is the latter as it doesn't appear to make sense otherwise.

Cheers,

- Lance

Link to comment
https://www.sau.com.au/forums/topic/420119-c34-fuel-setup/
Share on other sites

On the S1 ( I still have stock set-up) the fuel system goes like this:

The hard pipe goes to a fuel filter mounted in the engine bay near the RH strut tower and a rubber hose goes to the back (firewall) end of the fuel rail. There is a fuel regulator (still using the stocker) at the front end of the fuel rail and a rubber hose goes from there to a damper mounted just behind the filter and the return goes from there to the tank.

Link to comment
https://www.sau.com.au/forums/topic/420119-c34-fuel-setup/#findComment-6758207
Share on other sites

Okay thanks for that.

Mine isn't standard so it's hard for me to tell how it's meant to be. Does the fuel go in from the front or rear of the fuel rail? At the moment mine goes from the hard line, to a rubber line into the filter, then through the Tomei fuel pressure regulator (mounted on the drivers side strut tower) via rubber line into the front of the fuel rail. Then a rubber pipe comes off the back of the rail to the hard return line.

- Lance

Link to comment
https://www.sau.com.au/forums/topic/420119-c34-fuel-setup/#findComment-6758386
Share on other sites

Okay thanks for that.

Mine isn't standard so it's hard for me to tell how it's meant to be. Does the fuel go in from the front or rear of the fuel rail? At the moment mine goes from the hard line, to a rubber line into the filter, then through the Tomei fuel pressure regulator (mounted on the drivers side strut tower) via rubber line into the front of the fuel rail. Then a rubber pipe comes off the back of the rail to the hard return line.

- Lance

No the regulator is at the end of the rail thus pressurising the rail. Its possible yours is plumbed wrongly. Have you pulled off a hose and turned on the pump to confirm where the fuel is coming from? Maybe you are returning fuel via the filter! Does your car run properly??!

Link to comment
https://www.sau.com.au/forums/topic/420119-c34-fuel-setup/#findComment-6759164
Share on other sites

I've re done it all last night. The car was surprisingly running well even with the fuel filter on the return line, and backwards. Now I've got it going from the hard line, to rubber through the filter, into the back of the fuel rail. From the fuel rail to rubber to the reg, then rubber down to the hard return. Sound alright?

Cheers,

- Lance

Link to comment
https://www.sau.com.au/forums/topic/420119-c34-fuel-setup/#findComment-6759178
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That R31 was so cool. Only did Orange Park once. Scared the hell out of me.
    • Selling my TE37SLs since I've switched to smaller wheels.  They're for sale in Japan but it's pretty simple to send them overseas; USA excluded, since JPPost isn't sending there at the moment. Specs Front: 18x9.5j +22 5x114 Rear: 18x10j +20 5x114 Price: 320,000 JPY/ 3,285 AUD (current FX rate) Condition: a few scratches here and there, no bends, distortions or cracks.  Tires will not be included for international buyers, I'll get them dismounted before shipping. They're currently listed on yahoo auction and will be shipped in Japan with the tires if they sell here. Shipping costs to Aus: EMS (1-2 weeks): AUD 1,175 (current FX rate) Sea (2 months): AUD 460  (current FX rate)
    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
    • Wrinkle black will be a thing for both
×
×
  • Create New...