Jump to content
SAU Community

Recommended Posts

have you ever been through the mallaca straights?

it really is amazing it doesnt happen more often. its not like the ships can just put on the brakes and stop in 100m.

I was heading into singapore once (sailed in there a few times), and at 45 degrees to port and starboard or the bow, I counted over 90 contacts, then I gave up.

Link to comment
https://www.sau.com.au/forums/topic/42054-ship-sinks/#findComment-861509
Share on other sites

How the *** do you colide with a supertanker?  

Its not like u wouldnt see it coming!

Surprisingly its fairly easy for larger ships to collide.

Problem is that they are very hard to manouvre. You just cant turn them around or stop, it can take a long distance (kilometres)

Often they come across each others path's at fairly late notice and in heavy seas, or fog its all over. In really heavy seas its possible to loose sight of big ships very easily.

Commercial ships are alot different to control than a small tinny or even a 60ft charter boat!

Link to comment
https://www.sau.com.au/forums/topic/42054-ship-sinks/#findComment-861520
Share on other sites

that actually happened last week..and it was only about 100 japanese second-hand cars..still a shame though.

I had a friend last week whose car managed to make it safely to Australian shores, only to have a container accidentally dropped on it. doh!

Link to comment
https://www.sau.com.au/forums/topic/42054-ship-sinks/#findComment-861718
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...