Jump to content
SAU Community

Recommended Posts

Hey guys, I'm half way through fitting a front mount and am wondering g what to do with the washer bottle set up in the front right corner. The piping will foul it. Do I mount it else where or ditch it?

Thats one of the reasons people tend to buy return flow coolers so it uses the stock pipes in the engine bay.

I did it becuase i went high mount and FFP.... Ill have to locate the washer bottle on the passenger side as the oil cooler has taken up the rest of the space where the washer bottle was....

next problem?

where to run the boost line? if thats what it is?

the stock pipe that feeds into the intake had a nipple but nothing on the new one.

where do i fit it?

do i put a barb into the silicone joiner from the cold side where it meets the stock intake pipe?

i know this a noob question but i gota learn some how

cheers

yes i saw ur post. the original nipple was on the cold side near the intake pipe.

thats why i asked.

so would it be better to move it to the hot side near the compressor outlet or just put ib back where the original was?

got it finished... yew!

next time i will spend the dollars on a proper r34 kit, there were endless issues with the piping.

i replaced all the silicone joiners that were supplied as they were all to short or the wrong angle.

car has never driven so nice, its amazing how much more response it has with the FMIC and 3" turbo back exhaust.

cheers boys

Why do all piping kits come in 3 piece only? Does anyone know of an RB25 kit that has the turbo to intercooler pipe included?

89CAL that is a very nice setup you have. Good well done :)

The hot side pipe that comes of the turbo compressor and fits onto the 'cooler, I understand that there is only one hot side pipe that goes half way.

So basically what I am after is a inter cooler piping kit that goes from throttle body to turbo. I am running a GT3037S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...