Jump to content
SAU Community

Recommended Posts

Just an exhaust & Impul ECU

That's pretty good.13.9. I believe that's what Lamborghini Diablo's did. Not a shabby time.

How do you take off? No burnout. Go around the water.Then foot on break, rev's, foot off break go?

I've never had an auto before but the car doesn't seem to hold any revs when I try this and bogs down hard when I try to launch.

Am I missing something? The computer seems to kill the revs rather than just hold them up??

Just an exhaust & Impul ECU

Do you know the performance gain from the Impul and exphaust? I ask as the car I nearly bought had that exact same thing. An Impul ECU and an exhaust. I had no idea the power increase over a standard Stagea it might have had.

Also, 20Valve. Did you have a 20Valve 4AGE?

Matt, does your car have the brake cut mod done? If so, it will just be the stall converter being slightly too small for the turbo now it's highflowed. Some of this lag can be tuned out with the Emanage Ultimate.

That's pretty good.13.9. I believe that's what Lamborghini Diablo's did. Not a shabby time.

How do you take off? No burnout. Go around the water.Then foot on break, rev's, foot off break go?

I've never had an auto before but the car doesn't seem to hold any revs when I try this and bogs down hard when I try to launch.

Am I missing something? The computer seems to kill the revs rather than just hold them up??

Burnout or not made no difference, there's no wheelspin on takeoff regardless. And yeah, just stall it up on the line & get off the brake when you see a green light. lol

Sounds like brake cut switch isnt on if you cant get the revs up, maybe.

Do you know the performance gain from the Impul and exphaust? I ask as the car I nearly bought had that exact same thing. An Impul ECU and an exhaust. I had no idea the power increase over a standard Stagea it might have had.

Also, 20Valve. Did you have a 20Valve 4AGE?

The exhaust gave the most noticable difference, but i dont have any before & after figures. I'll line up someone with just an exhaust one day & see what the actual difference is to compare what the Impul is doing for me.

And yes, had a 20v AE86 years & years ago. :D

Burnout or not made no difference, there's no wheelspin on takeoff regardless. And yeah, just stall it up on the line & get off the brake when you see a green light. lol

Sounds like brake cut switch isnt on if you cant get the revs up, maybe.

The exhaust gave the most noticable difference, but i dont have any before & after figures. I'll line up someone with just an exhaust one day & see what the actual difference is to compare what the Impul is doing for me.

And yes, had a 20v AE86 years & years ago. :D

You has pics of Hachi?

My workshop owning mate just offloaded his 20V headed, GZE bottom ended AE86 a little while ago; was good for an 11.1 quarter! 330mm Wilwoods and a tonne of fun bits.

Very lively to drive.

what time you heading out might come down to watch and a yarn :yes:

From early. Can't stand queuing up in the scruitineers line.

Origin is on. No chance

No fks given. Hopefully it knocks the crowd on the head. Moar runs.

Slow.

Like the results.

Ok. PNM35 RX light mods cat back exhaust, plenum top, transgo kit, otherwise stock

14.9@93mph.

Did three runs. All within 0.01 of each other. Anyway, had some fun. 60 foot was the same as with the turbo kit. ET was 1.1 sec slower.

Slow.

Like the results.

Ok. PNM35 RX light mods cat back exhaust, plenum top, transgo kit, otherwise stock

14.9@93mph.

Did three runs. All within 0.01 of each other. Anyway, had some fun. 60 foot was the same as with the turbo kit. ET was 1.1 sec slower.

. Impressive top speed
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've searched fairly extensively among Japanese websites but found nothing really like those skirts in your photo. The closest I got was Origin Labo side skirts however they look more 'complete' in that they have a finishing piece or tab at the rear of the skirt so it blends into the bodywork, unlike the one in your pic. For that reason I'd say the skirts in your pic could be adapted from another car and they didn't include that tab piece, or those skirts aren't copied from an existing skirt but an original design. Sorry I can't help out in regard to ID'ing/sourcing them
    • Wonder if JB Weld sponsored the event lol
    • There's a big difference between a car built with millions of dollars in R&D, and someone like yourself taking a normal sporty road car, and making it 5 times more powerful. At the same time, get a modern sports car, and you can turn them up towards the 1000hp mark a lot easier too. Also, give that Lambo another 20 odd runs, and chances are it too may break something.
    • There isn’t really a cheap upgrade here. If someone made a decent, bolt in 6 speed that holds some grunt, it would do very well. The 5 speeds suck. You can put a - OSG 5 speed gear set into it. Ratios are tall so it zaps the “zing” out of it. Had one, busted it. - PPG 5 speed gear set synchro or dog’s. Ratios are even taller. - An overpriced Getrag. Nice to drive, expensive to source now. - A sequential of some sort. Expensive, very expensive. How many times do you pop a 5 speed before you throw the toys out of the cot?  
    • Yes, fair call. I don't have any special love for super/hyper cars but it was impressive to watch the Lambo line up against successive skylines without any problem at all. 
×
×
  • Create New...