Jump to content
SAU Community

Recommended Posts

It was a streeter, I would have loved to run it down here in the cool qld nights. I know it would make a massive difference having driven my stocker GTR in both summer and winter.

And yes, had the baby seat in and on street rubber, nothing special and at 35psi.

It was making 500hp at the wheels from memory. The acceleration was brutal.

Theres a list on here somewhere.

N1 group A turbos

N1 water and oil pumps

Z32 afms

Tomei cams

044 pump

Sard 720cc

Greddy rail/fpr

OS cam gears

REV I beam rods

Forged pistons

Blitz cooler

Greddy oil cooler

" reloc kit

Big fark off clutch from the boys at Direct

Stainless exh mani

Dumps, nismo front pipe, trust pe2 exhaust and a drift (laugh as you may, but the car made 20rwhp over the trust rear can)

pfc

new set of balls

could be some other stuff, probably is, but forgotten.

  • Like 1

In the write up I saw all electrics where removed o thought as was interior except for dash so stripped ill . Full weight means full interior everything as the car is on the street even street wheels " at least street drag radials " full exhuast, so a regularly street driven car

You're right - he's lost the rear seats but its still only 55kg lighter than my 1800kg C34

"With the passenger seat and belts, stereo, center console, guages and a few other little bits we added for the show and this meeting we are now up to 1745kg race weight, I'm sure a 5kg set of carpets won't hurt any."

__________________

In the write up I saw all electrics where removed o thought as was interior except for dash so stripped ill . Full weight means full interior everything as the car is on the street even street wheels " at least street drag radials " full exhuast, so a regularly street driven car

I would hate to weigh my old girl in , leather full electrics twin sunroof stereo equip lol , oh well after this next round of mods ill chuck her down the track again in full street trim "drive it there drive it back" see what damage I can do

But rips stagea is an absolute weapon I love it !

When you running yours kiwi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...