Jump to content
SAU Community

Recommended Posts

Just been reading in the papers and the car mags, and the new FORD BA XR6 Turbo is coming out 230 kw stock.

Its a 4.0 turbo six, and at 230kw stock i would say it has alot of potential being a 4.0 with a little mods exhuast and bit more boost probaly close to 300KW, so beleive it or not in about 4 months where going to be driving around and see fords, with FMIC, BOV's and even cop cars with TURBOS!

I guess there good and bad to this,

BAD- Fords are going to beating probaly alot of skylines GTS-T's

GOOD- Cops may not pick on us JAP turbo cars cause theres a aussie car with turbo and it will become normal! (maybe im just hoping 2 much)

Anyways Next year around feb , its going to be a interesting to see how this TURBO 4.0 SIX's to and how many get done up, i think it might be a new cult car since the WRX is not as pretty anymore.

What u guys think? FORD'S eating Skylines (since we mostly worry about commordores SS espicially now I think we going to be worrying about FORDS) ! !! and with FMIC and BOVS

and cop cars with turbo fords!

Link to comment
https://www.sau.com.au/forums/topic/4217-new-ford-xr6-turbo-230kw/
Share on other sites

You obviously havent seen the NEW WRX which is due in the not to distant future. Front has been reworked to look muck like a cross between a B4 and an Evo 7, no more BUG eyes.

and yeah Cops in falcon turbos will be to high maintenance and cost to operate. I think they would lean more towards SS commodores in this case.

my 2cents

Yeah they're looking pretty damn good aren't they? I might have to pick one up when I'm all old.

I wouldn't worry too much about stock ones, though. The base model XT weighs almost 1800kg or something close (not sure of the XR6T weight) and they've only got 240kw in XR6T trim. Boost them up a bit and chuck a few bolt ons on and then we'll have something to worry about.

My friend has just been testing the new V8 Falcon soon to be released. He says it has good susp for a stock car, good brakes and a bucket load of grunt and grip thanks to traction control. Plus a few new features not released on previous fords.

Hes guessing its got about 280kw, he says its quicker than any other falcon including the turbo, but he only drove an early development of the turbo.

People who have jobs in the automotive industry shit me.

  • 1 year later...

The xr6 turbo's will definately be able to run on normal unleaded, all that happens is the timing is retarded as soon as the knock sensor senses any funny business.

As for them making big power with just a few add ons, unless you deal with the over protective computer, you could actually go backwards. Thats why the aps/capa kits are so popular.

The other thing is they will be an absolute whore to get off the line on the street, with the amount of torque they have and the amount that they weigh, getting them up off the line will be a very tricky balance between disapearing in a cloud of wheelspin and bogging down.

i dont know if this has been posted before but does the new ford turbo 6 happen to be called the typhoon.

yup thats the new FPV version anyways. Gotta love that 550nm of torque :)

makes LS1's look weak

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...