Jump to content
SAU Community

Recommended Posts

.... 13.7 for a relatively stock ls1 in a reasonably heavy car is pretty good going. Your 33 is about the same weight as a commo with no interior or fat chicks. Most people have no idea how fast a flat 13 sec 1/4 really is.

N20 time... :yes:

I do. And this car should be getting close to them IF Nick setups the rear suspension AND tyres.

I'm in a heavier car, running 13.004 down the quarter at 106MPH.

Nick ran originally 13.9@106MPH in a car that is way lighter than I am.

Probably a smaller torque converter would help get this thing off the line easily, OR really really sticky rubber. Chasing more power is not going to help if you are already struggling to put power down at the half way mark...

I do. And this car should be getting close to them IF Nick setups the rear suspension AND tyres.

I'm in a heavier car, running 13.004 down the quarter at 106MPH.

Nick ran originally 13.9@106MPH in a car that is way lighter than I am.

Probably a smaller torque converter would help get this thing off the line easily, OR really really sticky rubber. Chasing more power is not going to help if you are already struggling to put power down at the half way mark...

I have et slicks sitting there, I never dropped my tire pressures the other day and I'm on stiff coil overs :)

I want a 12 second street car... It's just a matter of time

I do. And this car should be getting close to them IF Nick setups the rear suspension AND tyres.

I'm in a heavier car, running 13.004 down the quarter at 106MPH.

Nick ran originally 13.9@106MPH in a car that is way lighter than I am.

Probably a smaller torque converter would help get this thing off the line easily, OR really really sticky rubber. Chasing more power is not going to help if you are already struggling to put power down at the half way mark...

This is true... but for 2nd run at the drags with a poor set up it's not too bad.

As for improvements... Better tires, 0 static rear camber, softer rear springs/shocks, re-angle the rear cradle, adjust ride height to straighten drive shafts, lighten the car more, VHT tire prep.... list goes on. How far do you compromise???

This is true... but for 2nd run at the drags with a poor set up it's not too bad.

As for improvements... Better tires, 0 static rear camber, softer rear springs/shocks, re-angle the rear cradle, adjust ride height to straighten drive shafts, lighten the car more, VHT tire prep.... list goes on. How far do you compromise???

No need to lighten it, it just needs a sensible suspension setup put in it.

Softer rear shocks and springs, get rid of the epic camber, and run low 13s.

PS: My 13.004 was on my first EVER run at the drags... ;)

But Pineapples, different shocks/springs, realign suspension, DONE. Go run flat 13s on same power.

  • 1 month later...

Not really an update but a bit of car activity:

Dropped the oil and changed the oil filter and air filter yesterday preparing the car the the little run it got a Queensland raceway with the supra club yesterday. Overall the day was good with some mighty fast supras there, an even a 1uz powered jza80 (which I actually chopped down the main straight ;) )

So yeah just a few shots from the day.

mvZzTKg.jpg

0efesgi.jpg

dY0YF7C.jpg

Big thanks to QLDSC in particular tara and scott i know how much effort goes into organising events like this aswell as SAU Qld, Mike, Tony, Scot, Boz etc fantastic to see the club moving forward and getting back into some driving orientated events :)

Cheers

Not really an update but a bit of car activity:

Dropped the oil and changed the oil filter and air filter yesterday preparing the car the the little run it got a Queensland raceway with the supra club yesterday. Overall the day was good with some mighty fast supras there, an even a 1uz powered jza80 (which I actually chopped down the main straight ;) )

So yeah just a few shots from the day.

mvZzTKg.jpg

0efesgi.jpg

dY0YF7C.jpg

Big thanks to QLDSC in particular tara and scott i know how much effort goes into organising events like this aswell as SAU Qld, Mike, Tony, Scot, Boz etc fantastic to see the club moving forward and getting back into some driving orientated events :)

Cheers

vids of you chopping v8 supra

vids of you chopping v8 supra

Waiting for boz to finish editing the video, it was closeish actually but this definetly had more grunt must say the thing sounded sexy as sin was basically straight piped

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...