Jump to content
SAU Community

Recommended Posts

Intake done in December. I think the ping was before the intakes went in.

Even if it was after...wouldnt the ECU be picking up the different intake and adjust accordingly? I reset the ECU a couple of times since then.

Ping only at low revs...1.8k to 2.3k? higher revs/speeds no ping.

Link to comment
https://www.sau.com.au/forums/topic/423199-ping/#findComment-6809879
Share on other sites

Nope, have not changed spark plugs/fuel pump at all.

Got the car Nov 2012. Car is a 2007 V36. Got it with 36k kms on the clock.

I'll try United P100 and see what happens. Will try to clean MAF and throttle body on the weekend and proceed to spark plugs and fuel pump if all fails...

Is there anything I am missing? Should I try stock air intakes?

Link to comment
https://www.sau.com.au/forums/topic/423199-ping/#findComment-6809912
Share on other sites

Maybe try running some Subaru upper engine cleaner through it? Get rid of some gunk built up in there (and give you a nice clean intake manifold while you are at it - might not fix it, but for under $20 it is worth a try) My V35 ran beautifully afterwards

Link to comment
https://www.sau.com.au/forums/topic/423199-ping/#findComment-6810137
Share on other sites

It also depends on where you bought it as to whether it really has 36k on the clock - it costs under $100 to get this changed. If you have more km on the clock, there are other things that could be more built up in the engine or things that could be wrong. Obviously at 36k it should be basically a brand new car ...

Link to comment
https://www.sau.com.au/forums/topic/423199-ping/#findComment-6810198
Share on other sites

Ok ill try checking the AFM and the cleaner. I dump in Nulon Fuel System Cleaner and 44l of P100 last night. Lets see what happens over the next few days.

I bought the car on auction from Japan. It was checked for genuine KMs by computer system. Whether or not it's genuine, can't really be that sure but yes essentially the whole car looks brand new and nothing was modded or been touched.

Link to comment
https://www.sau.com.au/forums/topic/423199-ping/#findComment-6810623
Share on other sites

Could the the timing yes, one of the more common causes...

Mine has zero mods, its just my daily and I haven't had it for long, but being a high comp engine with Japanese ecu tuning I'm not hugely surprised by the ping on crappier fuel. But I will look at spark plugs and intake clean soon

The Mirage on the other hand has been driving me nuts. I have changed the plugs, plug leads, dizzy cap, rotor, fuel filter, air filter, checked the timing, three rounds of intake cleaning (two at home and one with a pro machine) and full bench injector clean with new o rings etc... yet, still pings :rolleyes:

Next step - colder plugs and oxy sensor. No luck with cheap OBD2 adaptor either

Link to comment
https://www.sau.com.au/forums/topic/423199-ping/#findComment-6813062
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...