Jump to content
SAU Community

Recommended Posts

Thought I'd make a thread where we can discuss our injuries in depth and offer non-professional advice for rehabilitation/prevention; keep track of exercise-affecting ailments etc.

I'll put a little disclaimer here that, any advice given in this thread (and the H&W section as a whole) should always be taken with a grain of salt and exists merely to provoke thought/possibilities. Most of us are not health professionals (though we all like to offer advice) and there is no substitute for consulting a health professional in real life who can physically test/scan for and recommend an appropriate course of action for the management of injuries.

We have a heavy focus on weightlifting here in this section; many of us able to relate to exercise specific injuries and rehabilitation methods, which means we can at least lead people in the right direction...whether it be recommending athlete-specific professionals or offering support to each other during tough times.

seasick_bandaid_17sb3c2-17sb3ks.jpg

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/
Share on other sites

  • Replies 160
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

my knee is farked. squats don't help, it creaks and clicks and cracks and sometimes 'unlocks' if i do a specific movement and i'm too lazy to see a doctor about it....if i sit with knees at 90 degrees sometimes on bad days it will feel like pressure is building up inside and i just have to straighten it out. oh and i've had this for 5+ years but it doesn't stop me from playing sports.

not looking for advice thought i'd just start things off.

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6818684
Share on other sites

my knee is farked. squats don't help, it creaks and clicks and cracks and sometimes 'unlocks' if i do a specific movement and i'm too lazy to see a doctor about it....if i sit with knees at 90 degrees sometimes on bad days it will feel like pressure is building up inside and i just have to straighten it out. oh and i've had this for 5+ years but it doesn't stop me from playing sports.

not looking for advice thought i'd just start things off.

I have the same problem.

Squats might not help, but Squats is the right thing to do.

Rev - post up your shoulder/scap rehab stuff in this thread.

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6818880
Share on other sites

Rev's shoulder rehab stuff would be pretty useful on the first page. I can add it to the first post if he wants to send me a summary of it.

We all know I have a shoulder problem at the moment. GP saw the ultrasound and is adamant its just inflammation/sprain of the supraspinatus. I personally call bullshit and will be seeing a physio about it for a second opinion. The anti-inflams are helping more each day, but are starting to plateau in what they can do for me, which makes me worry a bit, that there is an underlying issue and that's why the supraspinatus turned to shit in the first place.

Also had a blood test and I am vitamin D deficient at 66%. So vitamin D tablets to add to my collection of daily popping. Only a couple years ago I swore I would never take pills for anything...now I'm on 4 a day at age 26 lol

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6819900
Share on other sites

Also had a blood test and I am vitamin D deficient at 66%. So vitamin D tablets to add to my collection of daily popping. Only a couple years ago I swore I would never take pills for anything...now I'm on 4 a day at age 26 lol

66% ain't no thang!

Mine was down to about 33% at one stage and it started messing with my cognitive function and immune system real bad. Got sick all the time an I was so slow to process things, was real worrying before I knew what the issue was!

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6820248
Share on other sites

Today's leg session went something like this:

1x squats 60kg warm-up set, 8 reps

1x squats 100kg set, 8 reps

2x extra strength codeine tablets and 2x ibuprofen tablets

1x sit around in pain set

Proceeded to smash some 1 legged leg press sets @120kg before cracking the shits and going home.

I'm fairly sure this is a result of partial dehydration thanks to neglecting water through the day more than usual :(

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6820335
Share on other sites

  • 2 weeks later...

Thought i would post in here for a bit of advice.
Just got news that i have had a shoulder subluxation or partial subluxation after going to my GP. Wont know how bad it is till i get my xray and ultrasound done tomorrow.
Has anyone had anything similar? Kinda looking for a bit of rehab advice/motivation? Pretty miserable at the moment.

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6831578
Share on other sites

Now that helps heaps. Thanks.

I just realised I am not benching properly at all ie the bodybuilding bench in part 1! No wonder my shoulder is stuffing up more regularly now. That's actually pretty good as I can now improve it and hopefully find some extra strength using the powerlifting method.

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6831609
Share on other sites

66% ain't no thang!

Mine was down to about 33% at one stage and it started messing with my cognitive function and immune system real bad. Got sick all the time an I was so slow to process things, was real worrying before I knew what the issue was!

Yeah same. Mine got down to the low 30's (in combo with low iron and low calcium) as well and it started messing with my cognitive function, immune system and energy levels. Felt like a total Zombie.

you can get vitamin D for free... go outside

anti inflams are shit when used long term... be careful with them

Anti inflamms can screw with your Gastro intestinal tract long term. Should always be taken with food.
Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6832394
Share on other sites

Two areas that are most common and also connected. Shoulders & Thorasic ROM and strength.

I am doing work on some pretty awefull thorasic ROM I have (people who do office work syndrome). My shoulder ROM is getting better but, I haven't been putting in the time I should. I know what it's like to have it right on both fronts so trust me it's worth it getting back there.

Tests are on the web to look at. Here's a basic one for thorasic.

  1. Lie down on the floor, back flat against it.
  2. Your knees should be up with your feet and glutes flat on the floor.
  3. Lock your elbows and bring your arms directly overhead, attempting to touch your wrists to the ground above your head.
  4. Make sure to maintain contact between your lower back and the floor; don’t arch your back to get your hands in place.

If you can’t touch your wrists to the ground, you have poor thoracic mobility. To put a scapular variation on this , point the thumbs up and try and touch them on the ground.

This should be completed with no strain. If you have any pain or discomfort don't push through it, just work out where you end up, that is your baseline.

For shoulders two basic tests ;

Test A -- position

1) grab a couple of pencils or sticks in each of your fists.

2) raise the arms straight ahead of you so that the sticks point upwards

3) now let the arms just drop totally relaxed, don't control the decent at all.

4) note the angles of the pencils/sticks.

5) If they are both pointing straight ahead and parrallel to the floor then it's good. You might find them pointing slightly downward and inwards. If so shoulder work probably needed. One may be on more of an angle , that shoulder is worse.

6) Notice the difference if you concentrate on good posture shoulders back etc. Rather than work into this position you need to relax into it.

Test B -- ROM

1) Reach behind the head with one arm (palm facing the back and touching in between shoulder blades.

2) with the other arm reach up from underneath palm outwards and try to link up the fingers.

* Fingers touching or being able to monkey grip = good

* Fingers just touching = ok

* 2 inches away = need work

* More than two inches = bad

If you fail at the above then bench press will simply bitch slap your issues into progressively worse condition. Bench press is something people should consider alternatives for unless they are biomechanically designed for it or need to do it for competitions. You can build pecs without it but, if you are going to do it, then consider being fit for it in the first place.

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6840259
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Even with the piston at TDC there was room for it to drop, but I don't think it can drop fully into the cylinder, the problem you have is that you need something pushing against the valve to hold it up so you have enough room to put the new stem seal on and the spring etc.  I used compressed air only because putting rope in the cylinder seemed a bit risky to me, I know people have done it countless times before like this. Overall it's a pain in the ass job. Honestly you'd probably be better off taking the head off because the risk of dropping something in the engine and the finicky-ness of it all is very stressful. If you are going to attempt it though i 10000% recommend a 36050 valve spring/keeper tool. I had both the traditional lever type and after doing 1 cylinder it was absolute pain to get those valve keepers in place, even with 2 people. That 36050 is amazing, you do have to push hard to get them in place but it works perfectly almost every time. Back to my actual issue I think my engine is just tired and old and the rings have gone bad. The comp numbers (cold, no oil) were: Cyl 1 -129psi Cyl 2 - 133psi Cyl 3 - 138psi Cyl 4 - 137psi Cyl 5 - 157psi Cyl 6 - 142psi   Cylinder 5 and 6 having the most carbon on them.
    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
×
×
  • Create New...