Jump to content
SAU Community

Recommended Posts

Worried about how your car is handling? Want to know what you can do to improve her around corners and make her hug the road? We've organised a tech night with the guys at Fulcrum Stafford to show you what's going on in the world of suspension.

Event: SAU Tech Night - Suspension

This event will offer members the chance to get their cars up on a hoist and look and what's going on underneath. Minor issues such as slight wheel alignment tweaking and small adjustments can/will be made for free by the guys at Fulcrum but this is really an opportunity to take a good solid look under your car. Ideally looking at between 5-10 cars to make sure that everyone gets a shot. If you're going to the sprint day, you may want to make sure that you don't have suspension issues.

Location: Fulcrum Suspension, 46 Webster Road, Stafford

Date: Thursday, 2nd May 2013

Time: 6:00pm - 8:00pm

Cost: Free!


Requirements: This is a member only event. To attend, you will need to let us know in advance and have your member card ready.

We ask that attendees obey all Road rules.
we don't want people racing up and down the street or general Hooning.

Remember you are representing the Club, so we need to be on our best behaviour.



See you all there!
Tony

Link to comment
https://www.sau.com.au/forums/topic/424319-sau-tech-night-suspension/
Share on other sites

Excellent Carl. See you there!

Not everyone's car can be up on the hoist and this will be due to time constraints really. But it will give you an idea as to what to look out for.

Yeah mate understand about not everyone can have there car up on the hoist. I don't mind if mine doesn't go up at all, was just saying.

Damn living in Nth Queensland :( Glad to see stuff like this happening but, Props to SAU QLD team, one day we might venture up your way. Its on my to do list I swear :P

Thanks mate. A bit of appreciation from time to time doesn't go astray. :)

Yeah mate understand about not everyone can have there car up on the hoist. I don't mind if mine doesn't go up at all, was just saying.

All good mate. Was just making sure that everyone was one the same page :)

Personally, I'd prefer if people going to the sprints had their car up there. Would offer some peace knowing that everything is ok. :)

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...