Jump to content
SAU Community

Rb25Det Std Injectors Are 11Mm, Right?

s213b

By s213b,
in Engines & Forced Induction

 Share

Recommended Posts

Kinks Grand Master

Kinks

Posted
Posted

I'm looking at my options at the moment as well.

RB25DET NEO is top feed. RB25DET (R33 GTS-t series 1 and 2) are side feed.

To change to top feed injectors (which come in 11mm and 14mm) you need more than just a fuel rail. You'll need a new fuel regulator (since the factory one bolts up to the end of the factory side-feed rail, which you are ditching). You'll also need adapter plugs on the injectors as aftermarket injectors come with generic plugs not Nissan ones. And some assorted fittings and fuel hose.

If you are still using the factory intake manifold then you need to be very careful about the length of top feed injectors as you can run into clearance issues trying to get the rail under the intake manifold.

ARTZ has done a brilliant writeup here:

http://www.skylinesaustralia.com/forums/topic/403711-top-feed-rail-in-r33-with-stock-plenumyes-it-can-be-done/

The XSpurts and Injector Dynamics injectors are all based around the Bosch EV14, with a few modifications.

The other option is stick with side-feed injectors. Nismo 740cc are designed for our car by the motherland but they are a bit old now. Probably still do a fine job but not the "latest technology". There's also Power Enterprise and Deatschwerks which are new but I haven't heard as much about them.

s213b Rising Star

s213b

Posted
  • Author
Posted (edited)

The answer is still no.Side feed.

Now I'm just confused, I know my injectors are side feed (this was never the question?) I'm asking because I have the choice between 11mm & 14mm. And aren't 100% sure which ones to get.

Which one suits a STD rail s2 r33?

***EDIT: or are you telling me all side feeds = 11mm?

Edited by s213b
XR Pilot Contributor

XR Pilot

Posted
Posted (edited)

Now I'm just confused, I know my injectors are side feed (this was never the question?) I'm asking because I have the choice between 11mm & 14mm. And aren't 100% sure which ones to get.

Which one suits a STD rail s2 r33?

***EDIT: or are you telling me all side feeds = 11mm?

What everyone is telling you is your injectors are side feed. The 11mm or 14mm your asking about is terminology used to describe a top feed injector. A top feed injector won't fit a standard rail, so no matter if you buy either an 11mm injector or 14mm injector it will be a top feed and won't fit, you need side feed injectors. The picture below shows a top feed injector next to a side feed to better illustrate things. So either change your rail or buy side feeds.

01.jpg

Edited by XR Pilot
  • Like 1
s213b Rising Star

s213b

Posted
  • Author
Posted

What everyone is telling you is your injectors are side feed. The 11mm or 14mm your asking about is terminology used to describe a top feed injector. A top feed injector won't fit a standard rail, so no matter if you buy either an 11mm injector or 14mm injector it will be a top feed and won't fit, you need side feed injectors. The picture below shows a top feed injector next to a side feed to better illustrate things. So either change your rail or buy side feeds.

01.jpg

Thanks

This thread keeps on delivering!

Gotta learn from somewhere mate!

discopotato03 Grand Master

discopotato03

Posted
Posted

In another similar thread someone managed to mod an R34 Neo fuel rail to fit on an R33 RB25 inlet manifold with from 3/4 length Bosch EV14 injectors and adapter collars at the lower end . I've just been on the phone to someone I know who has a bare R33 RB25 inlet manifold and I'm going to use that to mock up a Neo rail if I can find one .

Side feeds are a PITA and not something that Nissan kept for very long , note GTRs never used them .

A .

Kinks Grand Master

Kinks

Posted
Posted

In another similar thread someone managed to mod an R34 Neo fuel rail to fit on an R33 RB25 inlet manifold with from 3/4 length Bosch EV14 injectors and adapter collars at the lower end .

don't post a link or anything :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...