Jump to content
SAU Community

Recommended Posts

how can i achieve around the 260kw atw's mark with a rb25det? what mods will i need done to do this and mods to make it reliable?.

1 how much power can the internals handle in rb25dets?

2 how much power can the fuel system handle? pump,injectors,regualator)

3 what hp figure is the standard t3 turbo rated at?

cheers.

It is VERY important to get a fuel pump that not only supplies the appropriate pressure and flow, but is also less likely to fail than the std item. The fact that my car no longer has it's original motor is a testament to that.

But in order:

1 how much power can the internals handle in rb25dets?

If tuned correctly, I would suggest that they're capable of reliably making 400 engine hp.

2 how much power can the fuel system handle? pump,injectors,regualator)

Injectors will prob be maxing out at 350 engine hp, regulator....dunno....pump piss it right off.

3 what hp figure is the standard t3 turbo rated at?

Firstly it isn't a T3. It's a specially made unit manufactured for Nissan by Hitachi. It does use a T3 flange and this is where the confusion comes from. I believe it is rated at about 340hp.

Adrian

Heavy duty Clutch - $1100

Front mount intercooler - $1500

Fuel pump - $450

injectors (altho its been proven to get 250kw's out of the standard injectors, get bigger for reliability) $1000

Turbo: HKS 2540 will get you their with good tune, or if you want a more power go for the GT3040 $1500 - $3000 new or second hand.

high mount exhaust manifold: $2500

maby aftermarket head gasket. (depends on what boost you want to run) $400

Ecu : maby power fc - $1200

wastegate - $500 - $800

hks exhust cam gear - $250

3" exhaust etc: - $1500

Thoes prices are just guestimate. theirs most likely stuff i've missed

get a set of cams, tomei ones 256 - 260 or whatever the ones sydneykids says to use :)

this will increase torque over the entire rev range and on boost too

the 2540 will just be laggy, if you want the same power level get a r33 highflow it should match the power of the 2540 without the lag.

the hks3040 brand new from nengun is around 2700 not including delivery. look at a gt30 with a gcg manifold instead, probably better and more cost effective, get an external gated turbo too. or even a trust kit which includes turbo, wastegate and manifold. i wouldnt just stick to hks just cos

ecu probably power fc, hand controller and boost controller kit

other ones like wolf3d dont use air flow meter so that solves your air flow meter problem

stock r33 gtr intercooler should be ok for upto 300rwkw vs brand new aftermarket one

youll need a new or good/better clutch twin plate as stated

i would do injectors and fuel pump and fuel regualtor to be sure to be sure, saves stuff going bang

also you *may* need a different air flow meter, depending on how much boost you run, the stock 33 one will max out and only show 5volts and give the wrong reading the ecu so the ecu will underfuel

i dont believe head gasket is needed, check out below threads

http://www.skylinesaustralia.com/forums/sh...ight=power+rwkw

http://www.skylinesaustralia.com/forums/sh...ight=power+2530

for some previous configs and power outputs. get a full exhaust, hiflow cat, hiflow dump and front pipe

my info is mainly from searching on here and reading up and learning myself so some of it could be slight out or incorrect, sorry if it is

Guest INASNT
how can i achieve around the 260kw atw's mark with a rb25det? what mods will i need done to do this and mods to make it reliable?.  

1 how much power can the internals handle in rb25dets?

2 how much power can the fuel system handle? pump,injectors,regualator)

3 what hp figure is the standard t3 turbo rated at?

cheers.

Like anything the rb25 will last as long as u treat it well. Dont drive full throttle and like u just stole it all the time and it will have a long life.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...