Jump to content
SAU Community

Recommended Posts

Just reading through your build up now 34geeteetee.

Somthing along the lines of the bolt ons im trying to find!

Impressive mate.

You may get a few stupid questions pm'd through to you. just giving u the heads up!

Just reading through your build up now 34geeteetee.

Somthing along the lines of the bolt ons im trying to find!

Impressive mate.

You may get a few stupid questions pm'd through to you. just giving u the heads up!

Haha i get plenty of questions and do what i can to answer them, none are normally stupid as we all start somewhere! I still learn on here most days :)

  • Like 1

I dont know... with the .82 rear and larger front the power delivery is still not going to be as brutal as the 2835...

however in saying this I have not driven a 3076 .82 with external gate on an RB25... but i still cant see it having the agression of the HKS unit, which for me is where the fun is at.

(i have driven an ex gate 3076 .82 on an RB25/30 however... shit was like driving on ice)

you would like mine...I dunno if you been in BIrds car, its pretty quick and very smooth, but mines alot more aggresive :devil:

its a bit more nice without the screamer now..

definately more fun if you ask me though it is hard to tell which will be faster without racing em though

I dont know... with the .82 rear and larger front the power delivery is still not going to be as brutal as the 2835...

however in saying this I have not driven a 3076 .82 with external gate on an RB25... but i still cant see it having the agression of the HKS unit, which for me is where the fun is at.

(i have driven an ex gate 3076 .82 on an RB25/30 however... shit was like driving on ice)

Like for like the cast GT compressor wheels are typically apparently nearly 30% heavier than the HTA ones - I'd go out on a limb and say that the GT3076R-HTA wheel is probably lighter than the GT3071R (and GT2835) wheel. Obviously you then have the .82 (as you mentioned) to factor in, but then you also have the greater wheel efficiency of the more modern design... quite a few swings and roundabouts there - but I am more thinking about the net result of the conversion than the initial spool. I personally loved the .82a/r GT3076R, and the HTA is only likely to be an improvement :)

Haha i get plenty of questions and do what i can to answer them, none are normally stupid as we all start somewhere! I still learn on here most days :)

Haha thanks mate much appreciated!

you would like mine...I dunno if you been in BIrds car, its pretty quick and very smooth, but mines alot more aggresive :devil:

definately more fun if you ask me though it is hard to tell which will be faster without racing em though

Mate do you have a build thread?

Dyno shows 4000ish on high boost runs..... Feels more lively on the street that what the graph shows though :)

that's what I meant... 2835 was up and running by about 3250...

I dont doubt the 3076 makes the power... but i reckon it's never going to be as responsive as the smaller 2835 no matter what the configuration

that's what I meant... 2835 was up and running by about 3250...

I dont doubt the 3076 makes the power... but i reckon it's never going to be as responsive as the smaller 2835 no matter what the configuration

No argument there... :)

Some info on the one result Lithium mentioned was in here -

http://www.skylinesaustralia.com/forums/topic/417832-precision-pt6766-vs-forcedperformance-gt3794r-hta-dyno-shootout/page-3

And there was another thread too "370kw" in the title i think it was! Interesting!

I also noticed there was a VQ result to be expected but i never saw anything posted about it since...

Do you have a dyno plot of full boost by 3250? How much boost was that?

not on me... I can show you one of my old engine with 98 and e85 that is pretty close, but that was a 200,000+ motor and eventually spun a biggie.

lol thanks! ill look it up!

Looking at the plazmaman plenum, the different size throttle bodies. How big is to big? or is needed etc?

I run the smallest one they have! I think 66mm or something from memory!

not on me... I can show you one of my old engine with 98 and e85 that is pretty close, but that was a 200,000+ motor and eventually spun a biggie.

That is not a bad innings! Mine is making the power on a 150k unopened motor :ph34r:

And there was another thread too "370kw" in the title i think it was! Interesting!

I also noticed there was a VQ result to be expected but i never saw anything posted about it since...

VQ is still sitting on workshop floor, but we have since turned back to utilising the existing SR instead :) Wanting something more brutal than linear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, they'll do it without a receipt, tell em roughly when it was, that it was cash, youll likely only get store credit, but that gets you some dollars towards the newer better shovel, or other item you need/want later.   Still take it back and have a crack at returning it.
    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
×
×
  • Create New...