Jump to content
SAU Community

Recommended Posts

Hello,

I am attempting to drop a GTX2863 in and i was wondering if anyone has tried this setup, or currently running it. Supporting mods will be Blitz SE FMIC, Nistune, Z32 AFM, 650cc injectors, fuel pump, 3-1/2" full jap exhaust, and a couple of other little computer bits and pieces. Stock internals, but healthy engine. I've been told around 250-290rwkw (maybe) on around 16 or so PSI, depending on tune. Before anyone asks why I'm not putting a GT3067 or something on, its because i want response, fast spool, and stock fitment. Also I can get one quite cheap, brand new installed for $1600 with everything needed to fit it.

Usually these turbos go great on a RB26 or something. Im sure one would run well, being rated for around 315rwkw.

Thanks anyone who has the time to reply, I appreciate your help.

John.

Edited by Roundcakes1
Link to comment
https://www.sau.com.au/forums/topic/425184-gtx2863-on-rb25det/
Share on other sites

Hello,

I am attempting to drop a GTX2863 in and i was wondering if anyone has tried this setup, or currently running it. Supporting mods will be Blitz SE FMIC, Nistune, Z32 AFM, 650cc injectors, fuel pump, 3-1/2" full jap exhaust, and a couple of other little computer bits and pieces. Stock internals, but healthy engine. I've been told around 250-290rwkw (maybe) on around 16 or so PSI, depending on tune. Before anyone asks why I'm not putting a GT3067 or something on, its because i want response, fast spool, and stock fitment. Also I can get one quite cheap, brand new installed for $1600 with everything needed to fit it.

Usually these turbos go great on a RB26 or something. Im sure one would run well, being rated for around 315rwkw.

Thanks anyone who has the time to reply, I appreciate your help.

They are not rated to 315rwkw, more like 315kw at the crank. There is no straight bolt-on version that I am aware of, you'd need an aftermarket/custom kit - be that including a modified/aftermarket housings or whatever. It will most likely require a reasonable amount of custom work.

They are not rated to 315rwkw, more like 315kw at the crank. There is no straight bolt-on version that I am aware of, you'd need an aftermarket/custom kit - be that including a modified/aftermarket housings or whatever. It will most likely require a reasonable amount of custom work.

I see, well I'm assuming he has the kit or modded housing that will go straight on. Apparently this guy has sold a couple of them. I think 315kw at the crank will still be around my goal power.

Anyways. Does it sound like too much work and money for only 315kw at the crank. I could just lash out, spend another couple of hundred and buy a GT3076, or GT-RS or something similar.

At least these are tested and proven. It sounds pretty sad to say, but I've seen some pretty good GT3076 deals with hose kits and gaskets, including new exhaust manifold for around the $2k mark. (I would prefer a low mount though)

Thanks for your help.

Edited by Roundcakes1

The GTX2863 is a tinny turbo. I don't believe they can pump 315rwkws.

I made a billet 64mm and 68mm comp wheel and used them in a customized one trim larger +2mm exd turbine based on the GT28 in a .86 rear and only managed to squeeze 276rwkws out of the 64mm and 298rwkws out of the 68mm. Those are E85 results on high mount externally gated setup.

My prediction on the GTX2863 is probably 230rwkws on pump 98 if used on stock manifold internally gated only if you run it on .86 rear. They will be red hot on .64.

spend another couple of hundred and buy a GT3076, or GT-RS or something similar.

i use a gt3076 with .63 rear. its very responsive. have no issues with it, standard manifold with mild porting, internal gate. using a apexi avcr boost controller as the small rear housing causes boost spikes. boost controller fixes this. i went from a gtrs to a 3076 and for the power difference (which dosnt feel like much, no dyno run as of yet) i wish i went for the .82 housing and sacrifice response over power.

point is get a 3076 with a small housing over the gtrs. thats my 2 cents. most people frown on a small housing gt3076r on a rb. best results will require WMI or E85 and external gate.

For what you would get from a GTX2863 on an RB25 I honestly believe you would be better off with a simple 2IU highflow from Hypergear.

User feedback on the 2IU is hard to overlook, some guys have used it for serious track and hillclimb duties to great success and response is what you would want it to be.

Its just too much effort to put on a 2863 with an unknown guinea pig rear housing when under $1,000 will have your stock turbo bolt back on LIKE STOCK and make the same 250rwkw mark with awesome response too.

For what you would get from a GTX2863 on an RB25 I honestly believe you would be better off with a simple 2IU highflow from Hypergear.

User feedback on the 2IU is hard to overlook, some guys have used it for serious track and hillclimb duties to great success and response is what you would want it to be.

Its just too much effort to put on a 2863 with an unknown guinea pig rear housing when under $1,000 will have your stock turbo bolt back on LIKE STOCK and make the same 250rwkw mark with awesome response too.

--------------------------------------------------------------------------------------------------------------------------------

You did a search didn't you..... ;)

--------------------------------------------------------------------------------------------------------------------------------

You did a search didn't you..... ;)

lol no?

What am I missing?

If its re the 2IU results you know the HG thread is almost my second home, I don't miss anything there. If re 'mystery housing' I actually wasn't making any assumptions, but now that you have called on my mamories I do recall there being one for sale not that long ago, but I could swear it was a 2867 in a sonic housing.. Not 2863.

Feel free to fill me in though.

You are missing nothing it was a lame attempt at humour about searching this site to find answers to questions that have been asked several times. At least this thread has brought up a new turbo combo that we haven't seen results for yet. Nevertheless for 250rwkw-ish it is hard to go past a well made hiflow exactly like you said.

Haha damn man, sorry for being so slow. Was a good call now that I've been spoon fed some IQ.

Agree, it was a quick wind down but still will solve any questions if anyone did search 2863 RB25.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...