Jump to content
SAU Community

Recommended Posts

When starting my car cold its ok.. as it warms up the turbo begins to make a weird humming/hovering sound.. is that something to worry about?

Please HELP!!!!

Some services factories are quoting me $250 to remove the turbo $900 to recondition (if its ****ed) and another $250 to put it back together... f**k that!

Link to comment
https://www.sau.com.au/forums/topic/42581-have-i-fked-my-turbo/
Share on other sites

at what rev's does it drop off?? if your goin 80k in 5th and put the foot down will it hold boost???

It will gradually get up to about 8psi if im in 5th at 80k..

but from 1st to 2nd.. and 2nd to 3rd it will boost to 10psi @ around 4500 -5000rpm then drop back to 8psi in the later revs..

does that mean anything?

Yer it means the standard turbo is shit,we all have the same problem.I have my turbo off to put on a HKS GT2535 and know wonder it drops off boost high in the rev range coz it's so small,me thinks it belongs on a lawn mower :)

Don't know what the noise is thou.

Presa, if i was a gambling man (i use to be but councilling has done wonders for me...) id say its nothing to worry about, its likely a $50m gasket from where to turbo bolts to the manifold, or perhaps the dump pipe to the turbo.

Replacing yourself isnt hard at all, and it will only cost you the $50 for a gasket... and a few cut bruised knuckles...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...