Jump to content
SAU Community

Recommended Posts

I just sold my Skyline one month ago and the owner has been away working and when he tried starting it the car it started than died. It wouldn't start at all after woulds and he flattened the battery twice trying to get it going. He got the vehicle towed to a mechanics and they have told him the car has no compression??? WTF could this be caused from washing the bores? Car ran fine and never blew smoke apart from being too rich at start up and idle it had no other issues

Link to comment
https://www.sau.com.au/forums/topic/426316-car-sat-for-a-month-wont-start/
Share on other sites

He got the vehicle towed to a mechanics and they have told him the car has no compression??? WTF could this be caused from washing the bores?

Bore wash increases wear to the bore so yes a loss of compression can happen

Sounds like the "Mechanic" doesn't know shit from sugar or he's trying one on.

Buyer drives it home, parks it, doesn't do anything else, a month later tries to start it to no avail.

- Replace Plugs ($25) n Battery ($150) with new. Try start it.

If indeed the compression is low (no compression - pfffft) it was farked before sold.

IMHO anyway.

Sounds like the "Mechanic" doesn't know shit from sugar or he's trying one on.

Buyer drives it home, parks it, doesn't do anything else, a month later tries to start it to no avail.

- Replace Plugs ($25) n Battery ($150) with new. Try start it.

If indeed the compression is low (no compression - pfffft) it was farked before sold.

IMHO anyway.

The mechanic doesn't know shit? but yet yet your giving him advice to spend 175$ on parts which may only turn out to be a further kick in the guts

Is this an RB20 or 25 at all? Sounds like the hydraulic lifters may have bled down due to sitting for too long. Just keep cranking, for no more than about 20secs at a time without letting the starter cool.

This is a easy

While he was away couple of hes pissed mates thought it was a great idea to take the skyline for a rap to Maccas to get a $2 cheeseburger or two

Nek Minit

Pushing it back where they got it from

  • Like 1

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

  • Like 1

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

Well said.

Simply put Yes I am. I believe the money is not wasted spent on these items. Not by the seller but by the buyer.

Cheaper option - clean existing plugs, swap in a battery from a mate and crank away....

-> Skyline works fine, not driven for a month, no compression - Some one is lying !!

If I didn't drive my GTR for a month. And then killed the battery twice trying to start it then I would do exactly what I advised.

My plugs will be fouled and my battery is likely also cactus. My compression would be 165-170 not 0psi

The mechanic doesn't know shit? but yet yet your giving him advice to spend 175$ on parts which may only turn out to be a further kick in the guts

  • Like 1

Maybe check the compression yourself to make sure, I can remember a similar thing with an r31 my bro owned, it ended up being a cracked cylinder head....

Edited by AngryRBGTX

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

so much this.

no compression?

so, not 1 cylinder has an ounce of pressure?

I find it very hard to believe.

maybe no fuel pressure?

in which case, fuel pump.

and it wouldn't start.

do the usual.

test fuel, test spark, actual comp test(with vid results), and go from there

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...