Jump to content
SAU Community

Recommended Posts

I just sold my Skyline one month ago and the owner has been away working and when he tried starting it the car it started than died. It wouldn't start at all after woulds and he flattened the battery twice trying to get it going. He got the vehicle towed to a mechanics and they have told him the car has no compression??? WTF could this be caused from washing the bores? Car ran fine and never blew smoke apart from being too rich at start up and idle it had no other issues

Link to comment
https://www.sau.com.au/forums/topic/426316-car-sat-for-a-month-wont-start/
Share on other sites

He got the vehicle towed to a mechanics and they have told him the car has no compression??? WTF could this be caused from washing the bores?

Bore wash increases wear to the bore so yes a loss of compression can happen

Sounds like the "Mechanic" doesn't know shit from sugar or he's trying one on.

Buyer drives it home, parks it, doesn't do anything else, a month later tries to start it to no avail.

- Replace Plugs ($25) n Battery ($150) with new. Try start it.

If indeed the compression is low (no compression - pfffft) it was farked before sold.

IMHO anyway.

Sounds like the "Mechanic" doesn't know shit from sugar or he's trying one on.

Buyer drives it home, parks it, doesn't do anything else, a month later tries to start it to no avail.

- Replace Plugs ($25) n Battery ($150) with new. Try start it.

If indeed the compression is low (no compression - pfffft) it was farked before sold.

IMHO anyway.

The mechanic doesn't know shit? but yet yet your giving him advice to spend 175$ on parts which may only turn out to be a further kick in the guts

Is this an RB20 or 25 at all? Sounds like the hydraulic lifters may have bled down due to sitting for too long. Just keep cranking, for no more than about 20secs at a time without letting the starter cool.

This is a easy

While he was away couple of hes pissed mates thought it was a great idea to take the skyline for a rap to Maccas to get a $2 cheeseburger or two

Nek Minit

Pushing it back where they got it from

  • Like 1

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

  • Like 1

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

Well said.

Simply put Yes I am. I believe the money is not wasted spent on these items. Not by the seller but by the buyer.

Cheaper option - clean existing plugs, swap in a battery from a mate and crank away....

-> Skyline works fine, not driven for a month, no compression - Some one is lying !!

If I didn't drive my GTR for a month. And then killed the battery twice trying to start it then I would do exactly what I advised.

My plugs will be fouled and my battery is likely also cactus. My compression would be 165-170 not 0psi

The mechanic doesn't know shit? but yet yet your giving him advice to spend 175$ on parts which may only turn out to be a further kick in the guts

  • Like 1

Maybe check the compression yourself to make sure, I can remember a similar thing with an r31 my bro owned, it ended up being a cracked cylinder head....

Edited by AngryRBGTX

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

so much this.

no compression?

so, not 1 cylinder has an ounce of pressure?

I find it very hard to believe.

maybe no fuel pressure?

in which case, fuel pump.

and it wouldn't start.

do the usual.

test fuel, test spark, actual comp test(with vid results), and go from there

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...