Jump to content
SAU Community

Recommended Posts

Yuh, echo that. Nissan, or for slightly firmer, the Nismo equivalents.

But as already meantioned above, it can be the engine, gearbox, diff, subframe mounts. Any and all of them. Could also be excessive lash in the drivetrain (diff gears, tailshaft centre bearing, CV joints).

It's often an exercise in trial and error to find and fix this stuff.



This is just part of life, a sucky part for sure. I have experienced this sensation all my life. It doesn't occur all that often but occasionally. I feel the burn shortly after Jerking. Forcing out small amounts of urine temporarily relieves the pain but after a while, standing anywhere and just forcing out a drop at a time, it becomes more frustrating than painfull. Through the years I have attempted various relief efforts. Ice, topical pain relievers, water, nothing works. Feels like soap in it. Always wondered if it was sweat or dirt that irritated it. Ive realized that it is more likely to happen after ive had small amounts of alchohol. After much trial and error, I HAVE FOUND A WAY to stop it. It may sound odd but it works for me. Its rather easy as well. Simply jerk a second time. Its like pumping your brakes. Cleans out debris and air pockets. Easiest way I can explain it.


Edited by Tommmay

I had this. I put up it until my car got written off. When I took the engine out the rubber mount on one side was cracked. Im certain it was the mount on the engine because the gearbox had a brand new mount and the ones on the diff and subframe were pretty solid when o got them checked.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...